[AccessD] OT: Network over the phone lines

Frank Tanner III pctech at mybellybutton.com
Tue May 20 07:36:48 CDT 2003


That works fine for an office build.  But RC cars
don't work well in raftered house ceilings.  Most
houses here use 2x6s or 2x8s for rafters.  Or at least
most of the ones that I've seen.

If you're running network lines down the same conduit
as electrical wiring you're violating about a dozen
fire and safety codes.  Not to mention every basic
rule of network wiring that there is.

Electrical wiring, ESPECIALLY two-phase and
three-phase wiring emit large amounts of RF.  RF kills
data integrity.  One of the most basic rules of
network wiring is NEVER string your network wires
across power conduits, junction boxes, or lighting
fixtures.  Don't believe me?  Ask anyone that does it
for a living.  You, physically, can do it, but you
shouldn't.  You're asking for trouble.

--- Bruce Bruen <bbruen at bigpond.com> wrote:
> Try a $50 remote control 4WD model (ATV? For youse
> yanquies?) - we wired
> 200+ points in an office building several years ago
> using a couple of
> these - without removing the false ceiling.  They
> have a great advantage
> over nerf balls as you can make them go around
> things!. Also used one to
> cast 240V twin core for ceiling downlights BETWEEN
> the ceiling and the
> upper floor in our "new" 1928 built house last year.
> One sparky said "it
> couldn't be done" without removing the original cast
> plaster ceilings,
> another said $4500+ (for running the cable).   I
> said "bullSh*t", and
> did it myself, got a GOOD sparky to connect the
> cabling to the house
> circuit and certify the work for $60 + 2 coffees and
> a couple of beers.
> 
> The way to get cable down a cored wall is to use
> that plastic strapping
> they use on whitegoods - as long as you can get a
> length of it - but
> better still is the plastic jointer strip out of
> quickclip flooring -
> you can shape the end to a blunt point and feed it
> UP a 1/2" or less
> core, attach the cable in the ceiling space and whip
> it down the core in
> approx 1/8 the time it takes the cat to get inside
> on a rainy day.  
> 
> If you DYI cat5, there is only one real tip - try
> not to kink the cable,
> otherwise I reckon its as good as $20/metre (or yard
> speaker cable for
> anything.  Oh, and another, if you cr*p up a
> connection on cat5 whether
> its Krone or grub screwed or whatever - cut the
> whole 4" off and start
> again, its not worth the hassle of bad connectors.
> 
> Have fun! Crawling in 18" high dusty, cramped, dark,
> lumpy (with sharp
> bits) spaces is what some idiots do for a sport!
> 
> Bruce
> 
> 
> From: accessd-bounces at databaseadvisors.com
> [mailto:accessd-bounces at databaseadvisors.com] On
> Behalf Of Frank Tanner
> III
> Sent: Tuesday, May 20, 2003 7:05 AM
> To: accessd at databaseadvisors.com
> Subject: Re: [AccessD] OT: Network over the phone
> lines
> 
> 
> Yeah.  Those work well for drop ceiling.  We used to
> use string tied to a Nerf football...hehehe
> 
> It can be a little more problematic in housing
> rafters
> though, unless you have lots of space.  Most houses
> here in Phoenix don't have attics, so the rafters
> have
> like 3 feet of clearance or so tops.  Makes it a
> real
> pain in the butt to string cable through....hehee
> 
> --- MartyConnelly <martyconnelly at shaw.ca> wrote:
> > Here is an article on tools and methods to use for
> > difficult CAT-5 cabling.
> > I really like the fly fishing rod and slingshot
> > methods.
> >
>
http://www.techrepublic.com/article.jhtml?id=r00320030218vgl01.htm&fromt
> m=e101-3
> > 
> > Rocky Smolin - Beach Access Software wrote:
> > 
> > >Frank:
> > >
> > >Thanks for the heads up.  I can get CAT5 to that
> > room but it will cost
> > >$500-600 because of where it is.  :(
> > >
> > >Looks like wireless for me.
> > >
> > >Rocky
> > >
> > >----- Original Message -----
> > >From: "Frank Tanner III"
> <pctech at mybellybutton.com>
> > >To: <accessd at databaseadvisors.com>
> > >Sent: Monday, May 19, 2003 5:29 AM
> > >Subject: Re: [AccessD] OT: Network over the phone
> > lines
> > >
> > >
> > >  
> > >
> > >>I highly recommend against this.  Most telephone
> > >>wiring in homes is CAT3 *AT BEST*.  In alot of
> > cases,
> > >>not even that good.
> > >>
> > >>Most home telephone wiring is so splices and
> > >>mickey-moused together that you will be lucky if
> > you
> > >>get any connection at all.  And if you do, it
> will
> > >>probably be spotty, at best, due to
> > electromagenetic
> > >>interferance from other devices.
> > >>
> > >>Network engineering is what I do for a living.
> > I'd go
> > >>wireless LONG before I'd trust home telco wiring
> > for
> > >>my LAN.  Myself, I strung CAT5 in my house.  But
> > >>that's because I know how to.  For most home
> users
> > >>wireless would be a perfect fit.  If you're
> > worried
> > >>about people leeching your bandwidth or
> "sniffing"
> > off
> > >>of your wireless LAN, there are ways to lock it
> > down,
> > >>simply.  Will it stop the determined leech? 
> Nope.
> > >>But it would stop 90% of the leeches that are
> out
> > >>there, because most are just looking for free
> > >>bandwidth.  Not to mention, I'd think you'd
> notice
> > >>someone sitting in front of your house with a
> laptop....hehehee
> > >>
> > >>--- Rocky Smolin - Beach Access Software
> <bchacc at san.rr.com> wrote:
> > >>    
> > >>
> > >>>Dear List(s):
> > >>>
> > >>>Got a new computer to put into a room where we
> > can't
> > >>>reach it with CAT-5.  So I've been ready to go
> > >>>wireless, except someone suggested using the
> > phone
> > >>>lines in the house (just as a substitute wire)
> > >>>instead of wireless.  Apparently, there's a
> > device
> > >>>that will connect the NIC and the phone jack
> and
> > you
> > >>>can use the phone wires in the house for
> > networking.
> > >>>
> > >>>Sounds, easy, and cheap, and low tech.  Anyone
> > know
> > >>>about this?
> > >>>
> > >>>MTIA
> > >>>
> > >>>Rocky Smolin
> > >>>Beach Access Software
> > >>>      
> > >>>
> >
> >>>>_______________________________________________
> > >>>>        
> > >>>>
> > >>>AccessD mailing list
> > >>>AccessD at databaseadvisors.com
> >
>
>>>http://databaseadvisors.com/mailman/listinfo/accessd
> > >>>Website: http://www.databaseadvisors.com
> > >>>
> > >>>      
> > >>>
> > >>_______________________________________________
> > >>AccessD mailing list
> > >>AccessD at databaseadvisors.com
> >
>
>>http://databaseadvisors.com/mailman/listinfo/accessd
> > >>Website: http://www.databaseadvisors.com
> > >>
> > >>    
> > >>
> > >
> > >
> > >_______________________________________________
> > >AccessD mailing list
> > >AccessD at databaseadvisors.com
> >
>
>http://databaseadvisors.com/mailman/listinfo/accessd
> 
=== message truncated ===



More information about the AccessD mailing list