Assembler was RE: [AccessD] Global Variable

DWUTKA at marlow.com DWUTKA at marlow.com
Wed May 18 14:53:29 CDT 2005


Sure.  However, if you have an option to write a faster application in the
same language...wouldn't you want to do that?

Drew

-----Original Message-----
From: Scott Marcus [mailto:marcus at tsstech.com]
Sent: Wednesday, May 18, 2005 2:47 PM
To: Access Developers discussion and problem solving
Subject: RE: [AccessD] Global Variable


Then we should all program in assembler.

-----Original Message-----
From: accessd-bounces at databaseadvisors.com
[mailto:accessd-bounces at databaseadvisors.com] On Behalf Of
DWUTKA at marlow.com
Sent: Wednesday, May 18, 2005 3:12 PM
To: accessd at databaseadvisors.com
Subject: RE: [AccessD] Global Variable

I don't know....since most people will use a faster application over a
slower application? (Just a wild guess....)

Drew

-----Original Message-----
From: Scott Marcus [mailto:marcus at tsstech.com]
Sent: Wednesday, May 18, 2005 12:57 PM
To: Access Developers discussion and problem solving
Subject: RE: [AccessD] Global Variable


And there my friend you have changed it's intended purpose. If it were
Global and you decided to change that, the functions that rely on it may
not work as intended.

My integer value may not be used in some math equation. Since when did
slower speed make something bad practice? 

-----Original Message-----
From: accessd-bounces at databaseadvisors.com
[mailto:accessd-bounces at databaseadvisors.com] On Behalf Of
DWUTKA at marlow.com
Sent: Wednesday, May 18, 2005 12:39 PM
To: accessd at databaseadvisors.com
Subject: RE: [AccessD] Global Variable

LOL.  Well, I did say that exceeding an Integer is possible, but that
was a
philosophical point.  It could exceed 32k, in your example, if you
decided
to include an extended family tree. Either way, using an Integer is much
slower then a Long Integer.

Drew

-----Original Message-----
From: Scott Marcus [mailto:marcus at tsstech.com]
Sent: Wednesday, May 18, 2005 7:41 AM
To: Access Developers discussion and problem solving
Subject: RE: [AccessD] Global Variable


<< Declaring a variables an Integer IS bad practice.  It is bad practice
because even if you think a variable will never go over 32k, or below
-32k, it can, and probably will.

Question: So when will the following declaration exceed the 32k, -32k
limit?

Dim intFamilyMembers as integer 'Number of immediate family members

Answer: When you declare the variable as a Public (global) variable,
then some other function written by some other developer changes its
intended use causing the original function to possibly work incorrectly.

Scott Marcus

-----Original Message-----
From: accessd-bounces at databaseadvisors.com
[mailto:accessd-bounces at databaseadvisors.com] On Behalf Of
DWUTKA at marlow.com
Sent: Tuesday, May 17, 2005 7:05 PM
To: accessd at databaseadvisors.com
Subject: RE: [AccessD] Global Variable

I guess I'm not seeing the same definition from John, though it was
closer
in the last few posts.  Yes, 'bad practice' sends me into a tail spin,
when
there is no reason for calling something bad practice.  Declaring a
variable
as an Integer IS bad practice.  It is bad practice because even if you
think
a variable will never go over 32k, or below -32k, it can, and probably
will.
But more importantly, an Integer is a 16 bit variable, and it takes
longer
to process an Integer then it does a Long Integer, on a 32 bit system.
The
first reason is a philosophy.  The second reason is a FACT!

I have yet to hear a fact, as to why Globals are 'bad practice'.  What
gets
my goat, though, is that this is a forum where developers of all skill
level
meet.  If opinions are given as facts, developers who are learning
something
new could be hampered by prejudice.  Ever run into an IT shop that
refuses
to allow applications to be developed in Access, because 'it's not a
database', or 'it's not secure', or something else, that is just
ignorance
repeated through 'tribal knowledge'?  (There is also usually power
involved...and IT shop has more power and control involved when
something is
on a server side db.)  That's why I rail on this stuff, because invalid
tribal knowledge can be dangerous!

Drew

-----Original Message-----
From: Francisco Tapia [mailto:fhtapia at gmail.com]
Sent: Tuesday, May 17, 2005 5:44 PM
To: Access Developers discussion and problem solving
Subject: Re: [AccessD] Global Variable


How right you are Charlotte!, This whole thread I hear the same
definition 
from both John and Drew... One should take caution while using global 
(public variables), Except John said the immortal words of "Bad
Programming 
Practice" wich for some reason seems to send Drew in a spin. He repeats 
John's definition but just omit's the "Bad Programming Practice" phrase.

Drew, there are a lot of things people can do w/ code, hundres of
variations

and they can all arrive to the same final solution, however I do believe

that there are certain procedures deemed as bad programming practice as
a 
principal. And rules are made to be broken. I've been working so much
more 
in Sql Server now-a-days and some of the common things that are bad 
programming practice there are such taboo tid-bits like cursors and
dynamic 
sql. This same type of argument seems to ignite holly wars between 
bounder-like devils and unbouder-like crusaders ;). It really is amazing
to 
find the various ways to accomplish something. Public (global) variables
are

yet another tool in our quest for solutions. John's point of view (if
i'm 
interpreting it correctly) is that in general try not to treat 
Public(global) variables like a hammer...

otherwise everything will just look like a nail.

and speaking of .. this whole thread has been beaten to death Or don't
you 
think so?


On 5/17/05, Charlotte Foust <cfoust at infostatsystems.com> wrote:
> 
> LOL. And for an encore, should I demonstrate proving ANOTHER negative
> like why you didn't prove anything??? <g>
> 
> Charlotte Foust
> 
> 
> -----Original Message-----
> From: DWUTKA at marlow.com [mailto:DWUTKA at marlow.com]
> Sent: Tuesday, May 17, 2005 1:53 PM
> To: accessd at databaseadvisors.com
> Subject: RE: [AccessD] Global Variable
> 
> LOL. Well Charlotte. Give me a valid reason. I think I have proven
> all of the current ones incorrect. If you don't think so, which ones?
> 
> Drew
> 
> -----Original Message-----
> From: Charlotte Foust [mailto:cfoust at infostatsystems.com]
> Sent: Tuesday, May 17, 2005 3:34 PM
> To: Access Developers discussion and problem solving
> Subject: RE: [AccessD] Global Variable
> 
> Give it up, John. When Drew decides no one elses arguments make any
> sense, there's no reasoning with him. ;->
> 
> Charlotte Foust
> 
> -----Original Message-----
> From: John W. Colby [mailto:jwcolby at colbyconsulting.com]
> Sent: Tuesday, May 17, 2005 1:06 PM
> To: 'Access Developers discussion and problem solving'
> Subject: RE: [AccessD] Global Variable
> 
> ROTFL.
> 
> John W. Colby
> www.ColbyConsulting.com <http://www.ColbyConsulting.com>
> 
> Contribute your unused CPU cycles to a good cause:
> http://folding.stanford.edu/
> 
> -----Original Message-----
> From: accessd-bounces at databaseadvisors.com
> [mailto:accessd-bounces at databaseadvisors.com] On Behalf Of
> DWUTKA at marlow.com
> Sent: Tuesday, May 17, 2005 3:58 PM
> To: accessd at databaseadvisors.com
> Subject: RE: [AccessD] Global Variable
> 
> You have said that using Globals is bad practice, which it is not.
That
> is my argument. The misuse is. 'Getting carried away with'...well,
> that's an iffy statement, because you have to judge what is 'getting
> carried away with' and what is not.
> 
> Drew
> 
> -----Original Message-----
> From: John W. Colby [mailto:jwcolby at colbyconsulting.com]
> Sent: Tuesday, May 17, 2005 2:02 PM
> To: 'Access Developers discussion and problem solving'
> Subject: RE: [AccessD] Global Variable
> 
> Would "getting carried away with globals" be considered misuse of
> globals? If you look back to the first post you see that is what I
> warned against. Notice I did NOT tell him that in his particular case
he
> should not use a global.
> 
> YOU have built an argument for your own amusement, but in the end it
has
> enabled us to discuss the issue which is a good thing.
> 
> John W. Colby
> www.ColbyConsulting.com <http://www.ColbyConsulting.com>
> 
> Contribute your unused CPU cycles to a good cause:
> http://folding.stanford.edu/
> 
> -----Original Message-----
> From: accessd-bounces at databaseadvisors.com
> [mailto:accessd-bounces at databaseadvisors.com] On Behalf Of
> DWUTKA at marlow.com
> Sent: Tuesday, May 17, 2005 2:40 PM
> To: accessd at databaseadvisors.com
> Subject: RE: [AccessD] Global Variable
> 
> Ah. There's the issue. 'If a global doesn't need to be SET by project
> wide code'. Okay. Now, that I will back down on. I personally don't
> have an issue with setting it one place, and using it other places. No
> problem there. But what if you are constantly using (reading and
> writing) it from many places in your project. Does a Global Variable
> fit the model? Of course! Honestly, I use classes too, and will make
> read only properties 'read only'.
> 
> Drew
> 
> P.S.-- Still doesn't make Globals bad practice, only misuse of
> globals...which is still my position.
> 
> -----Original Message-----
> From: John W. Colby [mailto:jwcolby at colbyconsulting.com]
> Sent: Tuesday, May 17, 2005 11:52 AM
> To: 'Access Developers discussion and problem solving'
> Subject: RE: [AccessD] Global Variable
> 
> I understand completely Drew. In order to not use globals you have to
> THINK and you are too busy typing to do that.
> 
> Correct me if I am wrong, but nowhere did I advocate any code like you
> mentioned. Can you show me where in my email I advocated that? What I
> said was that if a global doesn't need to be SET by project wide code
> then itdoesn't need to be global.
> 
> I have seen in your previous posts where you mention saving
keystrokes.
> Understand that I am NOT a data entry person. My job is to design well
> engineered systems. If that means more keystrokes, so be it.
> 
> John W. Colby
> www.ColbyConsulting.com <http://www.ColbyConsulting.com>
> 
> Contribute your unused CPU cycles to a good cause:
> http://folding.stanford.edu/
> 
> -----Original Message-----
> From: accessd-bounces at databaseadvisors.com
> [mailto:accessd-bounces at databaseadvisors.com] On Behalf Of
> DWUTKA at marlow.com
> Sent: Tuesday, May 17, 2005 11:32 AM
> To: accessd at databaseadvisors.com
> Subject: RE: [AccessD] Global Variable
> 
> Tighter? If I looked at code like this:
> 
> Dim MyModuleLevelString as String
> Private Function SetModuleLevelString(strValueToSet As String)
> MyModuleLevelString=strValueToSet End Function
> 
> I would think the developer was getting paid by the key stroke.....not
> that it was 'tight code'.
> 
> Drew
> 
> -----Original Message-----
> From: John W. Colby [mailto:jwcolby at colbyconsulting.com]
> Sent: Tuesday, May 17, 2005 6:59 AM
> To: 'Access Developers discussion and problem solving'
> Subject: RE: [AccessD] Global Variable
> 
> Gustav,
> 
> This is nothing new, and not something I take credit for figuring out.
> It is not uncommon when you work with classes to have methods set the
> values of and return the values from class properties. In fact with
> classes you have syntax constructs specifically for this - property
> get/set/let. You can, if you wish, dim a variable public in the class
> header and then it is just read / write to anyone with a pointer to
the
> class. Or you use a property get and or set/let in whatever
combination
> you need. A read-only value has only a property get. A Write-only has
> only a property set (not very common) and a read / write has a
property
> get and property let/set.
> 
> The objective is simply to control how the variable is read/written.
> Since the variable is dimensioned private to the module (or class),
only
> a function in the module or class can set the value, and only a
function
> in the module or class can return the value. To make a property "read
> only", create only a function that returns the value, but do not build
a
> function that sets the value. Then only the class or module itself can
> set the variable.
> 
> For example as the module initializes, perhaps some value is pulled
from
> a table and written into the variable. Then a function returns the
> value to any process that needs the value. Or perhaps the value is
> calculated by some math transformation using other values in other
> variables. The other variables are set by processes, but in order to
> read out the value, a function either returns the variable directly or
> returns the value of the mathematical transformation using the values
in
> the other variables.
> 
> This is not new stuff, I did not invent it, but it is commonly used to
> "replace" global variables such that the CONCEPT of a global variable
> exists (can be seen from anywhere) but still protects the variable
from
> being written when it shouldn't be or by processes that should not be
> able to write to the variable.
> 
> And yes, it is more work. It is just one of those things that you do
or
> your don't. If you accept the practice, then you start thinking about
> protecting variables, using variable scope, and using functions to set
/
> return values where appropriate. It becomes habit and your code
becomes
> a little bit tighter.
> 
> John W. Colby
> www.ColbyConsulting.com <http://www.ColbyConsulting.com>
> 
> Contribute your unused CPU cycles to a good cause:
> http://folding.stanford.edu/
> 
> -----Original Message-----
> From: accessd-bounces at databaseadvisors.com
> [mailto:accessd-bounces at databaseadvisors.com] On Behalf Of Gustav
Brock
> Sent: Tuesday, May 17, 2005 6:30 AM
> To: accessd at databaseadvisors.com
> Subject: RE: [AccessD] Global Variable
> 
> Hi John
> 
> Well, here we have full control on where functions put their nasty
> fingers.
> 
> I haven't managed yet to build self generating code; to some this
would
> indicate a brave new world, to some it would be a nightmare -
functions
> creeping around and attacking our globals and eating our children...
> gosh. But worse, they would soon learn how to take advantage of your
> functions to change those "private variables"! Be prepared.
> 
> /gustav
> 
> >>> jwcolby at colbyconsulting.com 05/16 10:58 pm >>>
> 
> .. Making this a global allows functions
> that have no business setting these variables to change them. By
having
> a private variable returned by a public function, any function that
> needs the information can get it but cannot modify it.
> 
> --
> AccessD mailing list
> AccessD at databaseadvisors.com
> http://databaseadvisors.com/mailman/listinfo/accessd
> Website: http://www.databaseadvisors.com
> 
> --
> AccessD mailing list
> AccessD at databaseadvisors.com
> http://databaseadvisors.com/mailman/listinfo/accessd
> Website: http://www.databaseadvisors.com
> --
> AccessD mailing list
> AccessD at databaseadvisors.com
> http://databaseadvisors.com/mailman/listinfo/accessd
> Website: http://www.databaseadvisors.com
> 
> --
> AccessD mailing list
> AccessD at databaseadvisors.com
> http://databaseadvisors.com/mailman/listinfo/accessd
> Website: http://www.databaseadvisors.com
> --
> AccessD mailing list
> AccessD at databaseadvisors.com
> http://databaseadvisors.com/mailman/listinfo/accessd
> Website: http://www.databaseadvisors.com
> 
> --
> AccessD mailing list
> AccessD at databaseadvisors.com
> http://databaseadvisors.com/mailman/listinfo/accessd
> Website: http://www.databaseadvisors.com
> --
> AccessD mailing list
> AccessD at databaseadvisors.com
> http://databaseadvisors.com/mailman/listinfo/accessd
> Website: http://www.databaseadvisors.com
> 
> --
> AccessD mailing list
> AccessD at databaseadvisors.com
> http://databaseadvisors.com/mailman/listinfo/accessd
> Website: http://www.databaseadvisors.com
> --
> AccessD mailing list
> AccessD at databaseadvisors.com
> http://databaseadvisors.com/mailman/listinfo/accessd
> Website: http://www.databaseadvisors.com
> --
> AccessD mailing list
> AccessD at databaseadvisors.com
> http://databaseadvisors.com/mailman/listinfo/accessd
> Website: http://www.databaseadvisors.com
> --
> AccessD mailing list
> AccessD at databaseadvisors.com
> http://databaseadvisors.com/mailman/listinfo/accessd
> Website: http://www.databaseadvisors.com
> 



-- 
-Francisco
http://pcthis.blogspot.com |PC news with out the jargon!
http://sqlthis.blogspot.com | Tsql and More...
--
AccessD mailing list
AccessD at databaseadvisors.com
http://databaseadvisors.com/mailman/listinfo/accessd
Website: http://www.databaseadvisors.com
-- 
AccessD mailing list
AccessD at databaseadvisors.com
http://databaseadvisors.com/mailman/listinfo/accessd
Website: http://www.databaseadvisors.com

 




NOTICE:  This electronic mail transmission is for the use of the named
individual or entity to which it is directed and may contain information
that is privileged or confidential.  If you are not the intended
recipient,
any disclosure, copying, distribution or use of the contents of any
information contained herein is prohibited.  If you have received this
electronic mail transmission in error, delete it from your system
without
copying or forwarding, and notify the sender of the error by replying
via
email or by calling TSS Technologies at (513) 772-7000, so our address
record can be corrected.   

Any information included in this email is provided on an "as is" and
"where
is" basis, and TSS Technologies makes no representations or warranties
of
any kind with respect to the completeness or accuracy of the information
contained in this email, or with respect to any other matters
communicated
in this email.  TSS Technologies hereby disclaims any and all express or
implied warranties of any kind.  Nothing in this email shall be
construed to
create any kind of contractual or binding agreement or commitment by or
on
behalf of TSS Technologies, Inc., the recipient, or any third-parties.
-- 
AccessD mailing list
AccessD at databaseadvisors.com
http://databaseadvisors.com/mailman/listinfo/accessd
Website: http://www.databaseadvisors.com
-- 
AccessD mailing list
AccessD at databaseadvisors.com
http://databaseadvisors.com/mailman/listinfo/accessd
Website: http://www.databaseadvisors.com

 




NOTICE:  This electronic mail transmission is for the use of the named
individual or entity to which it is directed and may contain information
that is privileged or confidential.  If you are not the intended
recipient,
any disclosure, copying, distribution or use of the contents of any
information contained herein is prohibited.  If you have received this
electronic mail transmission in error, delete it from your system
without
copying or forwarding, and notify the sender of the error by replying
via
email or by calling TSS Technologies at (513) 772-7000, so our address
record can be corrected.   

Any information included in this email is provided on an "as is" and
"where
is" basis, and TSS Technologies makes no representations or warranties
of
any kind with respect to the completeness or accuracy of the information
contained in this email, or with respect to any other matters
communicated
in this email.  TSS Technologies hereby disclaims any and all express or
implied warranties of any kind.  Nothing in this email shall be
construed to
create any kind of contractual or binding agreement or commitment by or
on
behalf of TSS Technologies, Inc., the recipient, or any third-parties.
-- 
AccessD mailing list
AccessD at databaseadvisors.com
http://databaseadvisors.com/mailman/listinfo/accessd
Website: http://www.databaseadvisors.com
-- 
AccessD mailing list
AccessD at databaseadvisors.com
http://databaseadvisors.com/mailman/listinfo/accessd
Website: http://www.databaseadvisors.com

 




NOTICE:  This electronic mail transmission is for the use of the named
individual or entity to which it is directed and may contain information
that is privileged or confidential.  If you are not the intended recipient,
any disclosure, copying, distribution or use of the contents of any
information contained herein is prohibited.  If you have received this
electronic mail transmission in error, delete it from your system without
copying or forwarding, and notify the sender of the error by replying via
email or by calling TSS Technologies at (513) 772-7000, so our address
record can be corrected.   

Any information included in this email is provided on an "as is" and "where
is" basis, and TSS Technologies makes no representations or warranties of
any kind with respect to the completeness or accuracy of the information
contained in this email, or with respect to any other matters communicated
in this email.  TSS Technologies hereby disclaims any and all express or
implied warranties of any kind.  Nothing in this email shall be construed to
create any kind of contractual or binding agreement or commitment by or on
behalf of TSS Technologies, Inc., the recipient, or any third-parties.
-- 
AccessD mailing list
AccessD at databaseadvisors.com
http://databaseadvisors.com/mailman/listinfo/accessd
Website: http://www.databaseadvisors.com



More information about the AccessD mailing list