[AccessD] Report Navigation on Custom Toolbar

A.D.Tejpal adtp at touchtelindia.net
Mon Oct 3 00:13:00 CDT 2005


Rocky,

    That is not a problem. The code sent in my first post in this thread enforces FitToWindow mode for the report, before carrying out SendKeys command.

    For adding buttons on the print preview toolbar, you have to right click on it and choose customize.

Best wishes,
A.D.Tejpal
--------------

  ----- Original Message ----- 
  From: Rocky Smolin - Beach Access Software 
  To: Access Developers discussion and problem solving 
  Sent: Sunday, October 02, 2005 02:58
  Subject: Re: [AccessD] Report Navigation on Custom Toolbar


  A.D.:

  What happens if I use the pop-up form approach and the user changes the report sizing so that it no longer is in "FitToWindow" mode?

  I'd like to put the navigation in the custom report toolbar I made but if SendKeys won't work then that's a no go.  How do you make a custom button for a toolbar anyway?

  Thanks and regards,
  Rocky

  ----- Original Message ----- 
  From: "A.D.Tejpal" <adtp at touchtelindia.net>
  To: "Access Developers discussion and problem solving" 
  <accessd at databaseadvisors.com>
  Sent: Friday, September 30, 2005 5:44 AM
  Subject: Re: [AccessD] Report Navigation on Custom Toolbar

  > Rocky,
  >
  >    It is a tiny pop-up form (similar to a tool bar) that sits in a corner of the screen. It gets opened via report's open event and closed via report's close event.
  >
  >    You might like to adapt the commands suitably to appropriate buttons on your tool bar. In that case, the commands specific to the form (i.e. hiding / un-hiding etc) can be ignored.
  >
  >    After ensuring that report window is the active one and the report is in FitToWindow mode, SendKeys arguments as summarized below, would do the needful.
  >    (a) Go to Next Page  -   "{DOWN}"
  >    (b) Go to Prev Page  -   "{UP}"
  >    (c) Go to Last Page   -   "^{DOWN}"
  >    (d) Go to First Page  -    "^{UP}"
  >
  >    It is observed that SendKeys commands do not get ported smoothly to tool bar functions. If you find yourself stuck on this account, and wish to avoid form based solution, you could consider experimenting with fTurnPage feature available at Leban's site. For this, you would have to download the file named ControlReports.zip.
  >
  >    Sample named ReportPreviewing.zip (by Heenan) at Roger's site, as mentioned by Ervin, represents the pop-up form approach.
  >
  >    If at any stage, you happen to need a simplified sample based upon the code sent by me earlier, I can try to put it together.
  >
  > Best wishes,
  > A.D.Tejpal
  > --------------
  >
  >  ----- Original Message ----- 
  >  From: Rocky Smolin - Beach Access Software
  >  To: Access Developers discussion and problem solving
  >  Sent: Thursday, September 29, 2005 20:05
  >  Subject: Re: [AccessD] Report Navigation on Custom Toolbar
  >
  >  A.D.:
  >
  >  Thanks for the idea.  Does this mean that the report preview appears in a 
  > pop-up or that there's a pop-up form with the navigation buttons?
  >
  >  I already have a custom toolbar with a minimum of controls on it - print, 
  > close, & fit.  I see that you can add controls for record navigation. 
  > They look like the icons I want but of course they don't turn the pages of 
  > a report.  I'd like to put the page navigation in the toolbar.
  >  Is there a way to change the action of those icons you can put on a 
  > custom toolbar?  Or is there a way to create a custom button for a toolbar 
  > that would turn the pages of a report?
  >
  >  Thanks and regards,
  >
  >  Rocky Smolin
  >  Beach Access Software
  >  http://www.e-z-mrp.com
  >  858-259-4334
  >
  >  ----- Original Message ----- 
  >  From: "A.D.Tejpal" <adtp at touchtelindia.net>
  >  To: "Access Developers discussion and problem solving"
  >  <accessd at databaseadvisors.com>
  >  Sent: Tuesday, September 27, 2005 11:00 AM
  >  Subject: Re: [AccessD] Report Navigation on Custom Toolbar
  >
  >
  >  > Rocky,
  >  >
  >  >    Sample code in the module of a pop-up form, as given below, enables
  >  > page navigation of report named R_Test. Command button named CmdNext 
  > steps
  >  > forward through the pages while that named CmdPrev does the reverse.
  >  >
  >  >    You might like to adapt it suitably for your specific situation.
  >  >
  >  >    Note - For the SendKeys command (Up or Dn arrow) to be effective, it 
  > is
  >  > necessary that report is in FitToWindow mode and report's window is the
  >  > active one.
  >  >
  >  > Best wishes,
  >  > A.D.Tejpal
  >  > --------------
  >  >
  >  > Code module for Pop Up Form
  >  > ================================
  >  > ' Declarations Section
  >  > Private RepHdw As Long, FrmHdw As Long
  >  >
  >  > Private Declare Function BringWindowToTop Lib "user32" _
  >  >                                    (ByVal hwnd As Long) As Long
  >  > --------------------------------------------------------
  >  > Private Sub CmdNext_Click()
  >  >    DoCmd.Echo False
  >  >    Me.Visible = False
  >  >    BringWindowToTop RepHdw
  >  >    DoCmd.RunCommand acCmdFitToWindow
  >  >    SendKeys "{DOWN}", True
  >  >    DoCmd.RunCommand acCmdZoom100
  >  >    Me.Visible = True
  >  >    BringWindowToTop FrmHdw
  >  >    DoCmd.Echo True
  >  > End Sub
  >  >
  >  > Private Sub CmdPrev_Click()
  >  >    DoCmd.Echo False
  >  >    Me.Visible = False
  >  >    BringWindowToTop RepHdw
  >  >    DoCmd.RunCommand acCmdFitToWindow
  >  >    SendKeys "{UP}", True
  >  >    DoCmd.RunCommand acCmdZoom100
  >  >    Me.Visible = True
  >  >    BringWindowToTop FrmHdw
  >  >    DoCmd.Echo True
  >  > End Sub
  >  >
  >  > Private Sub Form_Activate()
  >  >    DoCmd.Restore
  >  > End Sub
  >  >
  >  > Private Sub Form_Load()
  >  >    RepHdw = Reports("R_Test").hwnd
  >  >    FrmHdw = Me.hwnd
  >  > End Sub
  >  > ================================
  >  >
  >  >  ----- Original Message ----- 
  >  >  From: Rocky Smolin - Beach Access Software
  >  >  To: AccessD at databaseadvisors.com
  >  >  Sent: Monday, September 26, 2005 23:41
  >  >  Subject: [AccessD] Report Navigation on Custom Toolbar
  >  >
  >  >
  >  >  Dear List:
  >  >
  >  >  I have a custom toolbar for reports that get displayed in report 
  > preview
  >  > if the db is an mde.  It has only printer icon, close button, and zoom
  >  > control.  The paging navigation is of course, at the lower left of the
  >  > screen in preview mode, but I'm wondering if these nav buttons can be
  >  > added to the custom toolbar where an inexperienced user might be more
  >  > likely to see them.
  >  >
  >  >  MTIA,
  >  >
  >  >  Rocky Smolin
  >  >  Beach Access Software
  >  >  http://www.e-z-mrp.com
  >  >  858-259-4334



More information about the AccessD mailing list