[AccessD] VBA Unbound data entry / update form

Dan Waters dwaters at usinternet.com
Tue Jun 10 17:01:08 CDT 2008


Jim - how can we learn how to do this?

Dan

-----Original Message-----
From: accessd-bounces at databaseadvisors.com
[mailto:accessd-bounces at databaseadvisors.com] On Behalf Of Jim Lawrence
Sent: Tuesday, June 10, 2008 4:56 PM
To: 'Access Developers discussion and problem solving'
Subject: Re: [AccessD] VBA Unbound data entry / update form

Rocky, John

In the case of an SQL DB BE that whole issue is managed by the DB just as it
would if with a bound MDB only better.

Jim

-----Original Message-----
From: accessd-bounces at databaseadvisors.com
[mailto:accessd-bounces at databaseadvisors.com] On Behalf Of jwcolby
Sent: Tuesday, June 10, 2008 9:07 AM
To: Access Developers discussion and problem solving
Subject: Re: [AccessD] VBA Unbound data entry / update form

Rocky,

I hate to jump all over your method because I want a method 
to use, but you are completely ignoring locking / update 
issues.  What happened if another user updated the record 
between the time you loaded yours and the time you write it 
back?

John W. Colby
www.ColbyConsulting.com


Rocky Smolin at Beach Access Software wrote:
> I know how to make an unbound form but I haven't got enough nerve to
present
> such heresy - it runs counter to strongly held religious beliefs.  
> 
> OK - briefly - but you didn't hear it from me.
> 
> 1. Design your form as you would a bound form but no Control Source in the
> text boxes.
> 2. Create a recordset in the Open event of the form (DAO or ADO - I prefer
> DAO) using pretty much the same SQL or query as you would for your Record
> Source in a bound form.
> 3. Add a module to put the fields from the current record of the recordset
> into the text boxes which you can call whenever you want to display the
data
> on your form.
> 4. Add a module to put the values in the text boxes into the fields of the
> current record (in DAO use .Edit or .Add and .Update) which you can call
> whenever you want to write the textbox values back to the table.
> 5. I always put my own navigation buttons on the unbound for - First,
Last,
> Next, Previous with Click events that move the recordset point
> appropriately.
> 
> HTH
> 
> Rocky Smolin
> Beach Access Software
> 858-259-4334
> www.e-z-mrp.com
> www.bchacc.com
>  
>  
> 
> -----Original Message-----
> From: accessd-bounces at databaseadvisors.com
> [mailto:accessd-bounces at databaseadvisors.com] On Behalf Of Jim Lawrence
> Sent: Monday, June 09, 2008 5:38 PM
> To: 'Access Developers discussion and problem solving'
> Subject: Re: [AccessD] VBA Unbound data entry / update form
> 
> Hi Jennifer:
> 
> I have no idea how to create bound Access forms. ;-) The last bound
database
> that I have worked with was back in '97.
> 
> Jim
> 
> -----Original Message-----
> From: accessd-bounces at databaseadvisors.com
> [mailto:accessd-bounces at databaseadvisors.com] On Behalf Of Jennifer Gross
> Sent: Tuesday, May 27, 2008 5:12 PM
> To: 'Access Developers discussion and problem solving'
> Subject: Re: [AccessD] VBA Unbound data entry / update form
> 
> I have no idea how to create an unbound form in Access.  I always use
bound
> forms.  Though I would be interested to know how it's done.  Unless I've
got
> it wrong, that seems to be the basic question here - For those of you who
do
> it, how do you create an unbound form?  How do you populate the textboxes
> initially and then how do you save the information back to the tables?
> 
> It's beginning to sound like nobody really does it.
> 
> Jennifer
> 
> -----Original Message-----
> From: accessd-bounces at databaseadvisors.com
> [mailto:accessd-bounces at databaseadvisors.com] On Behalf Of jwcolby
> Sent: Tuesday, May 27, 2008 2:49 PM
> To: Access Developers discussion and problem solving
> Subject: Re: [AccessD] VBA Unbound data entry / update form
> 
>  > 1) If your situation gives you the choice between Access and SQL
Server,
> then you can use SQL Server Express.  For your customer's benefit - it's
> free!
> 
> I know that, and you know that, but they have used an MDB BE for most of a
> decade.  SQL Server is the great unknown.
> 
>  > 2) How many concurrent users?  Too Many?
> 
> In the majority of cases, no.  There ARE specific places where too many
> users cause mysterious issues with an MDB. 
> Memos are written in "pages", as are indexes.  If you open a record and
> start to edit it, it "locks" an entire "page" of the index structure or
the
> memo area, which locks not just your record but potentially many others.
> 
> This simply doesn't happen in SQL Server because SQL Server doesn't have
> this "page" system for storing memo fields etc.
> 
>  > 3) How many indexes on the tables?
> 
> Not the point, the point is that ALL indexes are stored in Index pages,
and
> entire pages of indexs can be locked by a single edit.
> 
> Creating / using Indexes should be determined by need, not arcane locking
> issues within Jet.
> 
>  > 4) Are you starting up by setting a recordset to open and leaving it
that
> way?
> 
> If you are talking about creating and holding locks on the BE, yes I am,
but
> that isn't the issue either.
> 
> John W. Colby
> www.ColbyConsulting.com
> 
> 
> Dan Waters wrote:
>> John - I've been reading this with interest:
>>
>> 1) If your situation gives you the choice between Access and SQL 
>> Server, then you can use SQL Server Express.  For your customer's 
>> benefit - it's free!
>>
>> 2) How many concurrent users?  Too Many?
>>
>> 3) How many indexes on the tables?  I actually only use the primary 
>> key as an index on every table.  More indexes slows down writing
> performance.
>> 4) Are you starting up by setting a recordset to open and leaving it 
>> that way?  This greatly reduces 'churn' in the locking database.  When 
>> I set this up all my users reported a significant performance
improvement.
> Code below:
>> '------------------------------------------------------------------------
>>     Dim stgConnect As String
>>     Dim dbs As DAO.Database
>>     Dim tdf As DAO.TableDef
>>         
>>     stgConnect = BEFullPath
>>     Set dbs = DBEngine(0)(0)
>>     Set tdf = dbs.TableDefs("tblConnect")
>>     If tdf.Connect <> ";Database=" & stgConnect Then
>>         tdf.Connect = ";Database=" & stgConnect
>>         tdf.RefreshLink
>>     End If
>>     dbs.Close
>>
>>     Set GrstConnect = DBEngine(0)(0).OpenRecordset("tblConnect",
>> dbOpenSnapshot)
>> '---------------------------------------------------------------------
>> ---
>>
>> Notes:  BEFullPath is a function to return the full path to the BE.
>>         tblConnect is a one row one field table in the BE.
>>         The table link is refreshed because the table link is in a
> library.
>>         GrstConnect is a globally defined DAO recordset.
>>         GrstConnect remains open until just before the database is
closed.
>>
>> Good Luck!
>> Dan
> --
> AccessD mailing list
> AccessD at databaseadvisors.com
> http://databaseadvisors.com/mailman/listinfo/accessd
> Website: http://www.databaseadvisors.com
> 
> 
> --
> AccessD mailing list
> AccessD at databaseadvisors.com
> http://databaseadvisors.com/mailman/listinfo/accessd
> Website: http://www.databaseadvisors.com
> 
> --
> AccessD mailing list
> AccessD at databaseadvisors.com
> http://databaseadvisors.com/mailman/listinfo/accessd
> Website: http://www.databaseadvisors.com
> 
> No virus found in this incoming message.
> Checked by AVG. 
> Version: 8.0.100 / Virus Database: 270.1.0/1492 - Release Date: 9/6/2008
> 10:29
> 
-- 
AccessD mailing list
AccessD at databaseadvisors.com
http://databaseadvisors.com/mailman/listinfo/accessd
Website: http://www.databaseadvisors.com

-- 
AccessD mailing list
AccessD at databaseadvisors.com
http://databaseadvisors.com/mailman/listinfo/accessd
Website: http://www.databaseadvisors.com




More information about the AccessD mailing list