[dba-Tech] SOLVED SORT OF DWL-G520 Adapter - Win98 - Won'tConnect

John W. Colby jwcolby at colbyconsulting.com
Tue Sep 13 08:17:02 CDT 2005


And persistence wins again.  I'm telling ya, just never stop trying and
eventually something will work.

John W. Colby
www.ColbyConsulting.com 

Contribute your unused CPU cycles to a good cause:
http://folding.stanford.edu/

-----Original Message-----
From: dba-tech-bounces at databaseadvisors.com
[mailto:dba-tech-bounces at databaseadvisors.com] On Behalf Of Tina Norris
Fields
Sent: Tuesday, September 13, 2005 8:43 AM
To: Discussion of Hardware and Software issues
Subject: Re: [dba-Tech] SOLVED SORT OF DWL-G520 Adapter - Win98 -
Won'tConnect


Hi All, and especially John Bartow, who tried to help -

I have my issue solved sort of - what I learned might be useful to 
someone else, so here goes:

As I originally described, I had installed the Win98SE drivers for a 
D-Link DWL-G520 wireless adapter card, and could not get a connection. 
 I learned that the card wants IRQ7, while Windows kept assigning it IRQ 
9 or 10 or 11, depending on which PCI slot I put it in - and Windows 
would not permit me to change the IRQ setting.  After working with 
several tech people at D-Link, I finally reached a very knowledgeable 
fellow, named Oscar Novarro (he's the one who looked up the IRQ 
requirements for this card - 7 and 22 - mine go only to 15).  My HP 
LJ4500 is on IRQ 7.  I considered uninstalling the printer, then 
installing the D-Link card, then reinstalling the printer to see if that 
sequence would get the card into IRQ7 - but, that printer wasn't the 
easiest to install the first time, so I really didn't want to do that 
unless I had to.

We worked out three ideas:
1) Find an upgrade for my Award BIOS to maybe let me change the IRQ
2) Swap the matching card from the nearly matching machine where it was 
all working just fine - see if that card worked in this machine, and see 
if my current card worked in the other machine.
3) Use a lower-demand card, the DWL-520, that would require less of my 
system than the "G" card.

I immediately did idea number 1 - and that was something of a nightmare, 
too, because the flash memory BIOS reader and updater software was 
somewhat ahead of the instruction literature, so, things on the screen 
did not match their descriptions in the instructions.  And, I had a 
temporarily completely inoperative machine.  But, I went back through 
everything and sorted out what had to be what, regardless of the failure 
to match, and got my machine back, running the new BIOS just fine.  That 
did not help the DWL-G520 issues.

I really didn't want to do number 2 because the machine that was working 
fine is the one my father is using.  It is working nicely, he doesn't 
much like being inconvenienced, I didn't want to upset that applecart 
and maybe find myself with yet another machine not working - so that was 
going to be a last resort effort.

The DWL-520 is no longer manufactured, but there are still some around 
(and they will be supported until April of 2008) - so I ordered a 
couple.  They arrived yesterday evening as I was making supper.  Yes, I 
put supper in the oven and went to install the new card.  This one works 
- first try.

So, now I have it working fine, using a lower level card.  My situation 
is repaired.  But, I still don't know why the "G" card worked in one 
Win98SE machine and not in its sister machine. From earlier tech 
discussions, it really does not appear that the card is bad, even though 
I hesitate to try it in my dad's machine - so I still have a mystery.

Anyway, there's my story and my sort of solution - new BIOS, new card.

Best,
Tina





Tina Norris Fields wrote:

> I know someone on this list can help me.  I am using wireless
> broadband for my internet connection.  Setting up the XP machines was 
> a snap. Setting up the Win98SE machines, on the other hand, has been a 
> bear each time.  Now I have one I can't get to even connect.
>
> System is Win98SE - Pentium II - 266MHz - 160Mb RAM - I forget how
> many Gb HD, think it's 6.
>
> It's an old machine, I know - temporarily assigned to my grandson
> until we get his "real" computer (for college).  I need to get it 
> connected to the internet.
>
> I've installed the DWL-G520 AirPlusXtremeG card.  I've downloaded and
> installed the updated drivers for Win98SE.  The hardware wizard finds 
> it and sets it up.  The adapter is in the device manager, shows as 
> working correctly.  I put the appropriate information in the 
> configuration screen - name of network, authentication, encryption, 
> WEP key, click Apply to save the settings.  But the site survey fails 
> to find the network.  And, when I return to the configuration screen 
> my settings are gone. 
> I've messed around with the network protocols and adapters screen - I 
> think I have them right - they pretty much match the settings on the 
> Win98SE machine that IS connecting.  However, I never - make that 
> NEVER - get a connection.  What is the engineer's definition of Hell?  
> A room full of the best, most modern machines, in perfect condition - 
> that won't work!
>
> I have found some articles on the net that I will hold in my hot
> little hands when I next attack this machine.  But, in the meantime, I 
> thought I'd ask  the gurus on this list for some suggestions.  Go 
> ahead and start at the beginning.   I am willing to retrace any and 
> all of my working process.  I still know so little about networking I 
> feel totally ignorant.
>
> Thanks for any assistance you can give.
>
> Tina
>
> _______________________________________________
> dba-Tech mailing list
> dba-Tech at databaseadvisors.com 
> http://databaseadvisors.com/mailman/listinfo/dba-tech
> Website: http://www.databaseadvisors.com
>


_______________________________________________
dba-Tech mailing list
dba-Tech at databaseadvisors.com
http://databaseadvisors.com/mailman/listinfo/dba-tech
Website: http://www.databaseadvisors.com






More information about the dba-Tech mailing list