[dba-Tech] SOLVED SORT OF DWL-G520 Adapter - Win98 - Won't Co nnect

John Bartow john at winhaven.net
Tue Sep 13 12:11:37 CDT 2005


Linksys and some others sell them too. I keep one around for PCs I'm working
on that don't have an Ethernet card in them.

Don't give up on the W98 PCs just because MS stops support. Just make sure
you get equipment that has drivers for it (if you ever need to get equipment
for them again).

I still support some W95 (yech). Work is work and some people will hold onto
their PCs until they absolutely fail. Around here there are people with not
just black & white but tube TVs!

-----Original Message-----
From: dba-tech-bounces at databaseadvisors.com
[mailto:dba-tech-bounces at databaseadvisors.com] On Behalf Of Jon Tydda

Sorry Tina, a USB wireless adaptor... the Netgear WG111T in fact.

Actually, for all my complaining about the wireless router not working, it
seems that simply by changing the channel, I've fixed it... so I can
recommend the Netgear DG834GT wireless DSL router as well :-) Shocking help
system though... virtually useless.


Jon

-----Original Message-----
From: Tina Norris Fields [mailto:tinanfields at torchlake.com]
Sent: 13 September 2005 17:30
To: Discussion of Hardware and Software issues
Subject: Re: [dba-Tech] SOLVED SORT OF DWL-G520 Adapter - Win98 - Won't Co
nnect


Jon,

Hmm - a USB printer or wireless adapter?  Have to admit I like the newer
stuff better - almost everything is USB on my WinXP machine.

But, my folks were born about the time of the Great Depression, so I grew up
with the mentality of keeping things, repairing them when they broke, and
never throwing away something that is obviously still good. 
 It's hard to make the transition to "throw-away" computers - I may never
get there on that one.  Win98SE will stop being supported by Microsoft in
June of 2006, I was told by the techs at D-Link, so by next summer I guess I
have to do something radical about all my Win98SE machines.  Better go earn
some money.

Best,
Tina

Jon Tydda wrote:

>Hey, mine did that... had to kick it's arse and install 2k on it to get any
>form of control over where it installed it. Had a hell of a job doing it
>too. Now I use a USB one, it's much easier!
>
>
>Jon
>
>-----Original Message-----
>From: Tina Norris Fields [mailto:tinanfields at torchlake.com]
>Sent: 13 September 2005 13:43
>To: Discussion of Hardware and Software issues
>Subject: Re: [dba-Tech] SOLVED SORT OF DWL-G520 Adapter - Win98 - Won't
>Connect
>
>
>Hi All, and especially John Bartow, who tried to help -
>
>I have my issue solved sort of - what I learned might be useful to 
>someone else, so here goes:
>
>As I originally described, I had installed the Win98SE drivers for a 
>D-Link DWL-G520 wireless adapter card, and could not get a connection. 
> I learned that the card wants IRQ7, while Windows kept assigning it IRQ 
>9 or 10 or 11, depending on which PCI slot I put it in - and Windows 
>would not permit me to change the IRQ setting.  After working with 
>several tech people at D-Link, I finally reached a very knowledgeable 
>fellow, named Oscar Novarro (he's the one who looked up the IRQ 
>requirements for this card - 7 and 22 - mine go only to 15).  My HP 
>LJ4500 is on IRQ 7.  I considered uninstalling the printer, then 
>installing the D-Link card, then reinstalling the printer to see if that 
>sequence would get the card into IRQ7 - but, that printer wasn't the 
>easiest to install the first time, so I really didn't want to do that 
>unless I had to.
>
>We worked out three ideas:
>1) Find an upgrade for my Award BIOS to maybe let me change the IRQ
>2) Swap the matching card from the nearly matching machine where it was 
>all working just fine - see if that card worked in this machine, and see 
>if my current card worked in the other machine.
>3) Use a lower-demand card, the DWL-520, that would require less of my 
>system than the "G" card.
>
>I immediately did idea number 1 - and that was something of a nightmare, 
>too, because the flash memory BIOS reader and updater software was 
>somewhat ahead of the instruction literature, so, things on the screen 
>did not match their descriptions in the instructions.  And, I had a 
>temporarily completely inoperative machine.  But, I went back through 
>everything and sorted out what had to be what, regardless of the failure 
>to match, and got my machine back, running the new BIOS just fine.  That 
>did not help the DWL-G520 issues.
>
>I really didn't want to do number 2 because the machine that was working 
>fine is the one my father is using.  It is working nicely, he doesn't 
>much like being inconvenienced, I didn't want to upset that applecart 
>and maybe find myself with yet another machine not working - so that was 
>going to be a last resort effort.
>
>The DWL-520 is no longer manufactured, but there are still some around 
>(and they will be supported until April of 2008) - so I ordered a 
>couple.  They arrived yesterday evening as I was making supper.  Yes, I 
>put supper in the oven and went to install the new card.  This one works 
>- first try.
>
>So, now I have it working fine, using a lower level card.  My situation 
>is repaired.  But, I still don't know why the "G" card worked in one 
>Win98SE machine and not in its sister machine. From earlier tech 
>discussions, it really does not appear that the card is bad, even though 
>I hesitate to try it in my dad's machine - so I still have a mystery.
>
>Anyway, there's my story and my sort of solution - new BIOS, new card.
>
>Best,
>Tina
>
>
>
>
>
>Tina Norris Fields wrote:
>
>  
>
>>I know someone on this list can help me.  I am using wireless 
>>broadband for my internet connection.  Setting up the XP machines was 
>>a snap. Setting up the Win98SE machines, on the other hand, has been a 
>>bear each time.  Now I have one I can't get to even connect.
>>
>>System is Win98SE - Pentium II - 266MHz - 160Mb RAM - I forget how 
>>many Gb HD, think it's 6.
>>
>>It's an old machine, I know - temporarily assigned to my grandson 
>>until we get his "real" computer (for college).  I need to get it 
>>connected to the internet.
>>
>>I've installed the DWL-G520 AirPlusXtremeG card.  I've downloaded and 
>>installed the updated drivers for Win98SE.  The hardware wizard finds 
>>it and sets it up.  The adapter is in the device manager, shows as 
>>working correctly.  I put the appropriate information in the 
>>configuration screen - name of network, authentication, encryption, 
>>WEP key, click Apply to save the settings.  But the site survey fails 
>>to find the network.  And, when I return to the configuration screen 
>>my settings are gone. 
>>I've messed around with the network protocols and adapters screen - I 
>>think I have them right - they pretty much match the settings on the 
>>Win98SE machine that IS connecting.  However, I never - make that 
>>NEVER - get a connection.  What is the engineer's definition of Hell?  
>>A room full of the best, most modern machines, in perfect condition - 
>>that won't work!
>>
>>I have found some articles on the net that I will hold in my hot 
>>little hands when I next attack this machine.  But, in the meantime, I 
>>thought I'd ask  the gurus on this list for some suggestions.  Go 
>>ahead and start at the beginning.   I am willing to retrace any and 
>>all of my working process.  I still know so little about networking I 
>>feel totally ignorant.
>>
>>Thanks for any assistance you can give.
>>
>>Tina
>>
>>_______________________________________________
>>dba-Tech mailing list
>>dba-Tech at databaseadvisors.com
>>http://databaseadvisors.com/mailman/listinfo/dba-tech
>>Website: http://www.databaseadvisors.com
>>
>>    
>>
>
>
>_______________________________________________
>dba-Tech mailing list
>dba-Tech at databaseadvisors.com
>http://databaseadvisors.com/mailman/listinfo/dba-tech
>Website: http://www.databaseadvisors.com
>
>
>The information in this e-mail is confidential and may also be legally
>privileged. The contents are intended for recipient only and are subject
>to the legal notice available on request from : webmaster at alcontrol.co.uk
>ALcontrol Laboratories is a trading division of ALcontrol UK Limited.
>Registered Office: Templeborough House, Mill Close, Rotherham, S60 1BZ.
>Registered in England and Wales No 4057291
>_______________________________________________
>dba-Tech mailing list
>dba-Tech at databaseadvisors.com
>http://databaseadvisors.com/mailman/listinfo/dba-tech
>Website: http://www.databaseadvisors.com
>
>  
>

_______________________________________________
dba-Tech mailing list
dba-Tech at databaseadvisors.com
http://databaseadvisors.com/mailman/listinfo/dba-tech
Website: http://www.databaseadvisors.com


The information in this e-mail is confidential and may also be legally
privileged. The contents are intended for recipient only and are subject
to the legal notice available on request from : webmaster at alcontrol.co.uk
ALcontrol Laboratories is a trading division of ALcontrol UK Limited.
Registered Office: Templeborough House, Mill Close, Rotherham, S60 1BZ.
Registered in England and Wales No 4057291
_______________________________________________
dba-Tech mailing list
dba-Tech at databaseadvisors.com
http://databaseadvisors.com/mailman/listinfo/dba-tech
Website: http://www.databaseadvisors.com




More information about the dba-Tech mailing list