[dba-Tech] FW: VS.NET equivalent of single-row form

Rocky Smolin at Beach Access Software rockysmolin at bchacc.com
Sun Mar 9 10:27:28 CDT 2008


A:

What is your email address now?  The one I have is no longer valid.

R
 




 	
	

-----Original Message-----
From: Rocky Smolin at Beach Access Software [mailto:rockysmolin at bchacc.com] 
Sent: Sunday, March 09, 2008 8:12 AM
To: 'Discussion of Hardware and Software issues'
Subject: RE: [dba-Tech] VS.NET equivalent of single-row form

A:

We used arrays.  I'll send you our mdb off-line - maybe give you some ideas
- with the caveat that it's not working correctly at this point.

Rocky





 	
	

-----Original Message-----
From: dba-tech-bounces at databaseadvisors.com
[mailto:dba-tech-bounces at databaseadvisors.com] On Behalf Of Arthur Fuller
Sent: Sunday, March 09, 2008 7:28 AM
To: Discussion of Hardware and Software issues
Subject: Re: [dba-Tech] VS.NET equivalent of single-row form

There's an intermediate table which I populate with a bunch of rows
corresponding to the available numbers (unused) and a row-column designator.
The number of rows manufactured for this table depends on the number of
numbers supplied in the problem, obviously. From there, a series of
elaborate joins to the Problem table's row eventually results in a solution.


Arrays are obviously a much more efficient approach (one for each sub-square
and a big one corresponding to my intermediate table), but I wanted to see
if I could do it in TSQL alone. Now that I have proved that I can, I will
eventually get around to doing it the "right" way. But I need to do a few
more things to this program to make it presentable, first. When I've got the
first version done, I'll post it, and then set to work on the array-version.

A.

On 3/9/08, Rocky Smolin at Beach Access Software <rockysmolin at bchacc.com>
wrote:
>
> Interesting.  I started writing one with Noah (my younger son) but 
> never finished it.  We were using a brute force method of initializing 
> each of the squares with all nine numbers and eliminating 
> possibilities based on various rules.  Got about half way there before 
> other stuff got in the way and we never finished it.
>
> What methods are you using to solve the puzzle?
>
>
> Rocky
>
>
>
>
>
>
>
>
> -----Original Message-----
> From: dba-tech-bounces at databaseadvisors.com
>
> [mailto:dba-tech-bounces at databaseadvisors.com] On Behalf Of Arthur 
> Fuller
> Sent: Sunday, March 09, 2008 6:53 AM
> To: Discussion of Hardware and Software issues
> Subject: Re: [dba-Tech] VS.NET equivalent of single-row form
>
>
> I'm making big progress on this little toy! I'm writing a Sudoku 
> problem solver. Actually I have already written the solver code -- in 
> TSQL no less LOL), and I just need a test and display harness for it.
> I've tracked down some allegedly difficult problems and the hardest 
> one I've found so far takes under 3 minutes to solve. No doubt the 
> code can be optimized significantly, but I wanted to see whether I 
> could do it in TSQL rather than simply using arrays, which would 
> obviously be way more efficient.
>
> Anyway, here's my current problem: I have a pair of forms, almost 
> identical.
> One addresses the Problems table, the other the Solutions table. The 
> Problems table has an Identity key. The stored procedure that does all 
> the magic creates a row in the Solutions table having the FK pointing 
> to the problem it solves.
>
> I have a button on the Problems form that opens the Solutions form. I 
> need to pass it the ProblemID and have it do one of two things:
>
> 1. If the solution exists, open the form and display it.
> 2. If the solution doesn't exist, solve the problem, then open the 
> form and display the solution.
>
> There is a potential wrinkle down the road, but I'm prepared to 
> postpone that part of the problem. (A given problem could have more 
> than one solution; this is generally considered bad form in posing the 
> problem in the first place, but that aside....)
>
> Actually, there is a second problem, too, which I have thus far 
> avoided because I'm taking my problems from web sites and newspapers, 
> so they all contain problems with solutions. But in theory, a problem 
> could be posed that obeys the setup rules but has no solution. So 
> eventually I will need a timer so I stop looking after a while. I 
> think. I'm not sure whether I can prove that problem X is unsolvable, 
> but that can wait for a while too.
>
> Anyway, I'm way ahead of myself here. I just need to open the Solution 
> form on the right solution (identified by ProblemID), and to detect 
> before I open the form whether there is a solution -- a simple SELECT
> COUNT(*) but I'm not sure how to code that and obtain the result in a 
> variable for inspection so I can act accordingly.
>
> One more question: can I mix languages in a single module? e.g. write 
> one method in C# and another in VB and a third in Python? Not that I'd 
> want to, necessarily, it's more a theory question.
>
> TIA,
> Arthur
>
> On 3/9/08, Arthur Fuller <fuller.artful at gmail.com> wrote:
> >
> > C# but I found it already. But I am going to do some parts of this 
> > thing in Python, if only for the exercise. I've been teaching myself 
> > Python, and have installed Iron Python, but haven't tried it out yet 
> > to explore the differences between it and classic Python.
> > A.
> >
> > On 3/9/08, Rocky Smolin at Beach Access Software 
> > <rockysmolin at bchacc.com>
> > wrote:
> > >
> > > Are you using VB.NET?  ASP.NET?  Something else?
> > >
> > > Rocky
> > >
> >
> >
>
> _______________________________________________
> dba-Tech mailing list
> dba-Tech at databaseadvisors.com
> http://databaseadvisors.com/mailman/listinfo/dba-tech
> Website: http://www.databaseadvisors.com
>
> No virus found in this incoming message.
> Checked by AVG.
>
> Version: 7.5.518 / Virus Database: 269.21.7/1319 - Release Date: 
> 3/8/2008
> 10:14 AM
>
>
>
> _______________________________________________
> dba-Tech mailing list
> dba-Tech at databaseadvisors.com
> http://databaseadvisors.com/mailman/listinfo/dba-tech
> Website: http://www.databaseadvisors.com
>
_______________________________________________
dba-Tech mailing list
dba-Tech at databaseadvisors.com
http://databaseadvisors.com/mailman/listinfo/dba-tech
Website: http://www.databaseadvisors.com

No virus found in this incoming message.
Checked by AVG. 
Version: 7.5.518 / Virus Database: 269.21.7/1319 - Release Date: 3/8/2008
10:14 AM
 




More information about the dba-Tech mailing list