Jim DeMarco
Jdemarco at hshhp.org
Mon Feb 10 16:09:00 CST 2003
Exactly. -----Original Message----- From: Andy Lacey [mailto:andy at minstersystems.co.uk] Sent: Monday, February 10, 2003 3:51 PM To: accessd at databaseadvisors.com Subject: RE: [AccessD] Partition Function A97 Sounds like a trial and error job with your references. :-( Andy Lacey http://www.minstersystems.co.uk > -----Original Message----- > From: accessd-admin at databaseadvisors.com > [mailto:accessd-admin at databaseadvisors.com] On Behalf Of Jim DeMarco > Sent: 10 February 2003 20:46 > To: accessd at databaseadvisors.com > Subject: RE: [AccessD] Partition Function A97 > > > I tried removing both AS statements and still no luck. > Really weird thing is the code below won't work in the new > mdb either. My library db where it works has a lot of > references so I don't know which if any might be necessary. > > Thanks, > > Jim DeMarco > > > -----Original Message----- > From: Andy Lacey [mailto:andy at minstersystems.co.uk] > Sent: Monday, February 10, 2003 3:38 PM > To: accessd at databaseadvisors.com > Subject: RE: [AccessD] Partition Function A97 > > > Can you say 'As Count'? Isn't Count a reserved word? > > Andy Lacey > http://www.minstersystems.co.uk > > > > > -----Original Message----- > > From: accessd-admin at databaseadvisors.com > > [mailto:accessd-admin at databaseadvisors.com] On Behalf Of Jim DeMarco > > Sent: 10 February 2003 20:30 > > To: accessd at databaseadvisors.com > > Subject: RE: [AccessD] Partition Function A97 > > > > > > I'm not so sure about that Charlotte. I can use Partition in > > A97 as follows: > > > > Sub DoPartition() > > 'testing Partition function > > Dim ans As Variant > > Dim i As Integer > > > > For i = 11 To 110 Step 13 > > ans = Partition(i, 1, 100, 10) > > Debug.Print "Value " & i & " falls in range: " & ans > > Next i > > End Sub > > > > Which returns: > > Value 11 falls in range: 11: 20 > > Value 24 falls in range: 21: 30 > > Value 37 falls in range: 31: 40 > > Value 50 falls in range: 41: 50 > > Value 63 falls in range: 61: 70 > > Value 76 falls in range: 71: 80 > > Value 89 falls in range: 81: 90 > > Value 102 falls in range: 101: > > > > Is there a reference I need to add maybe? The code above > > runs in my code library mdb (A97) but not a new one I'm > > putting together for a demo (also A97). > > > > Thanks, > > > > Jim DeMarco > > > > > > > > -----Original Message----- > > From: Charlotte Foust [mailto:cfoust at infostatsystems.com] > > Sent: Monday, February 10, 2003 3:07 PM > > To: accessd at databaseadvisors.com > > Subject: RE: [AccessD] Partition Function A97 > > > > > > Sorry, but Partition came in with A2k. You can't use it in > > 97, along with Replace(), Split(), Join(), etc. > > > > Charlotte Foust > > > > -----Original Message----- > > From: Jim DeMarco [mailto:Jdemarco at hshhp.org] > > Sent: Monday, February 10, 2003 11:40 AM > > To: AccessD (E-mail) > > Subject: [AccessD] Partition Function A97 > > > > > > Shouldn't the following SQL work in A97? I can get the > > Partition function working in a loop in a test module but not > > when I try to run it against a table. I'm running this > > against the Northwind Orders table to test and get "This > > expression is typed incorrectly or is too complex..." error > > anytime I try to use Partition in a query. Works fine in > A2K though. > > > > <sql> > > SELECT DISTINCTROW Partition([Freight],0,1000,50) AS Range, > > Count(Orders.Freight) AS Count FROM Orders GROUP BY > > Partition([Freight],0,1000,50); </sql> > > > > > > TIA, > > > > Jim DeMarco > > Director of Product Development > > HealthSource/Hudson Health Plan > > > > > > > > ************************************************************** > > ********** > > *********** > > "This electronic message is intended to be for the use only > > of the named recipient, and may contain information from > > HealthSource/Hudson Health Plan (HS/HHP) that is confidential > > or privileged. If you are not the intended recipient, you > > are hereby notified that any disclosure, copying, > > distribution or use of the contents of this message is > > strictly prohibited. If you have received this message in > > error or are not the named recipient, please notify us > > immediately, either by contacting the sender at the > > electronic mail address noted above or calling HS/HHP at > > (914) 631-1611. If you are not the intended recipient, please > > do not forward this email to anyone, and delete and destroy > > all copies of this message. Thank You". > > ************************************************************** > > ********** > > *********** > > > > _______________________________________________ > > AccessD mailing list > > AccessD at databaseadvisors.com > > http://databaseadvisors.com/mailman/listinfo/a> ccessd > > Website: > > http://www.databaseadvisors.com > > _______________________________________________ > > AccessD mailing list > > AccessD at databaseadvisors.com > > http://databaseadvisors.com/mailman/listinfo/a> ccessd > > Website: > > http://www.databaseadvisors.com > > > > > > > > ************************************************************** > > ********************* > > "This electronic message is intended to be for the use only > > of the named recipient, and may contain information from > > HealthSource/Hudson Health Plan (HS/HHP) that is confidential > > or privileged. If you are not the intended recipient, you > > are hereby notified that any disclosure, copying, > > distribution or use of the contents of this message is > > strictly prohibited. If you have received this message in > > error or are not the named recipient, please notify us > > immediately, either by contacting the sender at the > > electronic mail address noted above or calling HS/HHP at > > (914) 631-1611. If you are not the intended recipient, please > > do not forward this email to anyone, and delete and destroy > > all copies of this message. Thank You". > > ************************************************************** > > ********************* > > > > _______________________________________________ > > AccessD mailing list > > AccessD at databaseadvisors.com > > http://databaseadvisors.com/mailman/listinfo/a> ccessd > > Website: > > http://www.databaseadvisors.com > > > > > > _______________________________________________ > AccessD mailing list > AccessD at databaseadvisors.com > http://databaseadvisors.com/mailman/listinfo/a> ccessd > Website: > http://www.databaseadvisors.com > > > > ************************************************************** > ********************* > "This electronic message is intended to be for the use only > of the named recipient, and may contain information from > HealthSource/Hudson Health Plan (HS/HHP) that is confidential > or privileged. If you are not the intended recipient, you > are hereby notified that any disclosure, copying, > distribution or use of the contents of this message is > strictly prohibited. If you have received this message in > error or are not the named recipient, please notify us > immediately, either by contacting the sender at the > electronic mail address noted above or calling HS/HHP at > (914) 631-1611. If you are not the intended recipient, please > do not forward this email to anyone, and delete and destroy > all copies of this message. Thank You". > ************************************************************** > ********************* > > _______________________________________________ > AccessD mailing list > AccessD at databaseadvisors.com > http://databaseadvisors.com/mailman/listinfo/a> ccessd > Website: > http://www.databaseadvisors.com > > _______________________________________________ AccessD mailing list AccessD at databaseadvisors.com http://databaseadvisors.com/mailman/listinfo/accessd Website: http://www.databaseadvisors.com *********************************************************************************** "This electronic message is intended to be for the use only of the named recipient, and may contain information from HealthSource/Hudson Health Plan (HS/HHP) that is confidential or privileged. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of the contents of this message is strictly prohibited. If you have received this message in error or are not the named recipient, please notify us immediately, either by contacting the sender at the electronic mail address noted above or calling HS/HHP at (914) 631-1611. If you are not the intended recipient, please do not forward this email to anyone, and delete and destroy all copies of this message. Thank You". ***********************************************************************************