[AccessD] HELP Very odd problem (to me anyhow)

Charlotte Foust cfoust at infostatsystems.com
Fri Jun 20 14:41:27 CDT 2003


I doesn't take Access XP or Office XP to cause this.  Any of the 2002
apps, including Visio, Project and Publisher will cause the same
problem.

Charlotte Foust

-----Original Message-----
From: John Clark [mailto:John.Clark at niagaracounty.com] 
Sent: Friday, June 20, 2003 11:25 AM
To: accessd at databaseadvisors.com
Subject: RE: [AccessD] HELP Very odd problem (to me anyhow)


No, but I do have A2K and A97 on the machine. I just got through reading
something about this on the MS Knowledgebase...and I see Charlotte
writes the same thing. Good news is I can avoid it in the future, but
the bad new is that it will take me a good part of Monday to fix
it...I've already complained to this list about my inability to gain
access to my office on the weekend...ludicrous isn't it...you've got a
project that was scheduled for a May 1st completion, and it is needed
badly, but you won't allow your people to work on it over a weekend.
Don't get me wrong, I love having my weekends free, but this also needs
to be done, and it is harder to jump back into it after a couple days
away...I'd rather get it over with and then enjoy my weekend, knowing
that Monday won't be such a PITA.

Take care everyone...thanks for the help...have a great weekend!!!

John W Clark

>>> jcolby at colbyconsulting.com 06/20/03 02:49PM >>>
Your fe is corrupt.  Do you have 2K and XP on the same machine?  This
can and does cause this kind of corruption.

John W. Colby
www.colbyconsulting.com 

-----Original Message-----
From: accessd-bounces at databaseadvisors.com 
[mailto:accessd-bounces at databaseadvisors.com]On Behalf Of John Clark
Sent: Friday, June 20, 2003 2:39 PM
To: accessd at databaseadvisors.com 
Subject: Re: [AccessD] HELP Very odd problem (to me anyhow)


To add on to my own post...

When I finished writing this Email, I created a new form from scratch,
and cut & pasted all controls from the old form to the new one. This new
form worked fine, but of course none of the code is there either, so I
went back to the old form to cut out the code...I was going to do this
piece by piece, hoping to find the snag...but, when I attempt to go to
the code window, I get the afore mentioned error, and although it lets
me into the coding section, no code seems to exist.

>>> John.Clark at niagaracounty.com 06/20/03 01:57PM >>>
I haven't bugged any of ya in quite a while now...about two months plus.
I have actually been away from Access and instead, learning the fine art
of IP phones, and wireless networking.  Now I am back into Access and
having a major problem.

I am working on a program that I was probably 90% done with, when I was
pulled off for the other project. And, when I press certain buttons, I
was receiving errors that, "...Network connection my have been lost." I
first thought it was no big deal...the program, because of my other
duties, has run so far behind, that I will just delete the offending
buttons and recreate them...but then grew more concerned, when I
received this error, while trying to comment out the code behind the
buttons. I decided, because of time constraints, that it would be best
to create a totally new program and import the pieces into it. This
isn't working either.

I have only inported the tables, queries, and three very simple
forms...these are just "switchboard" type forms...that, using buttons,
call other forms or each other. I reuse these same forms for each
program that I do, so that all programs in the county have a similar
look and feel to them. I have done this a few times now, and each time
they work, until I restart the program. I then get the following error,
when I attempt to open the form:

<ERROR START>
The expression On Open you entered as the event property setting
produced the following error: Error accessing file. Network connection
may have been lost.

* The expression may not result in the name of a macro, the name of a
user-defined function, or [Event Procedure].
* There may have been an error evaluating the function, event, or macro.
<ERROR END>

There doesn't appear to be any code there, when I look. And, equally
puzzling, is that I am not using it on the network. I created it on my
hard drive, and I am running it from there now.

Anybody seen anything like this before?

Thanks!



John W. Clark
Computer Programmer / Asst. Network Administrator
Niagara County
Central Data Processing _______________________________________________
AccessD mailing list
AccessD at databaseadvisors.com 
http://databaseadvisors.com/mailman/listinfo/accessd 
Website: http://www.databaseadvisors.com 
_______________________________________________
AccessD mailing list
AccessD at databaseadvisors.com 
http://databaseadvisors.com/mailman/listinfo/accessd 
Website: http://www.databaseadvisors.com 



_______________________________________________
AccessD mailing list
AccessD at databaseadvisors.com 
http://databaseadvisors.com/mailman/listinfo/accessd 
Website: http://www.databaseadvisors.com
_______________________________________________
AccessD mailing list
AccessD at databaseadvisors.com
http://databaseadvisors.com/mailman/listinfo/accessd
Website: http://www.databaseadvisors.com


More information about the AccessD mailing list