[AccessD] [Fwd: [dba-Tech] Printer Tank Counter]

Rocky Smolin - Beach Access Software bchacc at san.rr.com
Mon May 29 18:07:51 CDT 2006


Marty:

I saw that procedure for the 1500.  Apparently they 'fixed' it for the 
1600.  So it don't work no more. :-(

I'll see what the fora have to say.

Thanks and regards,

Rocky


MartyConnelly wrote:
>  Almost all Canons are resettable using a series of buttons presses..
> or search the forums here
> http://www.nifty-stuff.com/forum/viewforum.php?id=4
>
>
> I found this on this thread: There is more here
>
> http://www.fixyourownprinter.com/forums/inkjet/15284
>
>
>     Canon PIXMA iP1500
>     Waste Ink Counter Reset. Manual for Service mode
>
>     1. Turn off the printer. And disconnect the printer cable.
>     2. Press and hold the POWER button, turn on the printer.
>     3. The indicator (L.E.D.) should be green.
>     4. Press and release the RESUME button , the indicator (L.E.D.)
>     should be orange.
>     5. Press and release the RESUME button again, the indicator
>     (L.E.D.) should be green
>     6. Release both buttons
>
>
>
> Rocky Smolin - Beach Access Software wrote:
>
>   
>> Dear List:
>>
>> Didn't get any response to this on tech.  Maybe someone here knows the 
>> answer.
>>
>> MTIA
>>
>> Rocky
>>
>>
>> -------- Original Message --------
>> Subject: 	[dba-Tech] Printer Tank Counter
>> Date: 	Fri, 26 May 2006 09:06:54 -0700
>> From: 	Rocky Smolin - Beach Access Software <bchacc at san.rr.com>
>> Reply-To: 	Discussion of Hardware and Software issues 
>> <dba-tech at databaseadvisors.com>
>> To: 	dba-tech <dba-tech at databaseadvisors.com>
>>
>>
>>
>> Dear List:
>>
>> I got a couple of Canon PIXMA iP1600s free with the purchase of a couple 
>> of 19 inch flat screen monitors at Fry's.
>>
>> Of course, the low ink warning comes up when the carts are still about 
>> 1/3 full but that's the scam.  Give away the razor, sell the blade.
>>
>> Anyway, I refilled the cartridges but the warning still comes up every 
>> time I print something.  Apparently these printers are "chipped" with 
>> some kind of bogus counter rather than actually sensing the ink level.
>>
>> In any event I combed the net looking for info on resetting this counter 
>> (without actually having to spend $40-50 on new carts which is what the 
>> printer retails for anyway).
>>
>> Does anyone know how or even if this counter can be reset so the low ink 
>> nag screen doesn't pop up every time I print something.
>>
>> MTIA,
>>
>> Rocky
>>
>>  
>>
>>     
>
>   

-- 
Rocky Smolin
Beach Access Software
858-259-4334
www.e-z-mrp.com




More information about the AccessD mailing list