[AccessD] [Fwd: [dba-Tech] Printer Tank Counter]

MartyConnelly martyconnelly at shaw.ca
Mon May 29 23:39:47 CDT 2006


Dunno, I use a local dropbox refill service.
Stick in a envelope, put in a computer store box
and it is mailed back within a week.

Rocky Smolin - Beach Access Software wrote:

>Yeah.  Might have to.  That low ink message is annoying.  You think the 
>'waste ink pad counter' is the same as the 'low ink' message?
>
>Rocky
>
>
>MartyConnelly wrote:
>  
>
>>You may have to spend $10.00
>>To reset waste ink pads counters you have to use iP1600 Service Tool
>>http://www.2manuals.com/product_info.php?products_id=680
>>
>>
>>Rocky Smolin - Beach Access Software wrote:
>>
>>  
>>    
>>
>>>I saw that procedure for the 1500.  Apparently they 'fixed' it for the 
>>>1600.  So it don't work no more. :-(
>>>
>>>I'll see what the fora have to say.
>>>
>>>Thanks and regards,
>>>
>>>Rocky
>>>
>>>
>>>MartyConnelly wrote:
>>> 
>>>
>>>    
>>>      
>>>
>>>>Almost all Canons are resettable using a series of buttons presses..
>>>>or search the forums here
>>>>http://www.nifty-stuff.com/forum/viewforum.php?id=4
>>>>
>>>>
>>>>I found this on this thread: There is more here
>>>>
>>>>http://www.fixyourownprinter.com/forums/inkjet/15284
>>>>
>>>>
>>>>   Canon PIXMA iP1500
>>>>   Waste Ink Counter Reset. Manual for Service mode
>>>>
>>>>   1. Turn off the printer. And disconnect the printer cable.
>>>>   2. Press and hold the POWER button, turn on the printer.
>>>>   3. The indicator (L.E.D.) should be green.
>>>>   4. Press and release the RESUME button , the indicator (L.E.D.)
>>>>   should be orange.
>>>>   5. Press and release the RESUME button again, the indicator
>>>>   (L.E.D.) should be green
>>>>   6. Release both buttons
>>>>
>>>>
>>>>
>>>>Rocky Smolin - Beach Access Software wrote:
>>>>
>>>> 
>>>>   
>>>>
>>>>      
>>>>        
>>>>
>>>>>Dear List:
>>>>>
>>>>>Didn't get any response to this on tech.  Maybe someone here knows the 
>>>>>answer.
>>>>>
>>>>>MTIA
>>>>>
>>>>>Rocky
>>>>>
>>>>>
>>>>>-------- Original Message --------
>>>>>Subject: 	[dba-Tech] Printer Tank Counter
>>>>>Date: 	Fri, 26 May 2006 09:06:54 -0700
>>>>>From: 	Rocky Smolin - Beach Access Software <bchacc at san.rr.com>
>>>>>Reply-To: 	Discussion of Hardware and Software issues 
>>>>><dba-tech at databaseadvisors.com>
>>>>>To: 	dba-tech <dba-tech at databaseadvisors.com>
>>>>>
>>>>>
>>>>>
>>>>>Dear List:
>>>>>
>>>>>I got a couple of Canon PIXMA iP1600s free with the purchase of a couple 
>>>>>of 19 inch flat screen monitors at Fry's.
>>>>>
>>>>>Of course, the low ink warning comes up when the carts are still about 
>>>>>1/3 full but that's the scam.  Give away the razor, sell the blade.
>>>>>
>>>>>Anyway, I refilled the cartridges but the warning still comes up every 
>>>>>time I print something.  Apparently these printers are "chipped" with 
>>>>>some kind of bogus counter rather than actually sensing the ink level.
>>>>>
>>>>>In any event I combed the net looking for info on resetting this counter 
>>>>>(without actually having to spend $40-50 on new carts which is what the 
>>>>>printer retails for anyway).
>>>>>
>>>>>Does anyone know how or even if this counter can be reset so the low ink 
>>>>>nag screen doesn't pop up every time I print something.
>>>>>
>>>>>MTIA,
>>>>>
>>>>>Rocky
>>>>>
>>>>>
>>>>>
>>>>>   
>>>>>     
>>>>>
>>>>>        
>>>>>          
>>>>>
>>>> 
>>>>   
>>>>
>>>>      
>>>>        
>>>>
>>> 
>>>
>>>    
>>>      
>>>
>>  
>>    
>>
>
>  
>

-- 
Marty Connelly
Victoria, B.C.
Canada




More information about the AccessD mailing list