[AccessD] ADO code stopped working

MartyConnelly martyconnelly at shaw.ca
Mon Feb 5 14:46:05 CST 2007


I am just wondering if TheQuery has to be run once to compile it?

or this

ACC2000: How to Use Parameters with ActiveX Data Objects (ADO) and Jet
http://support.microsoft.com/kb/225897/en-us

Method 3: Using an Implicit Parameter
NOTE: Implicit parameter names have brackets ([ ]) around them,
and you must use the brackets (or the parameter's ordinal position)
when referring to implicit parameters in the Parameters collection.
 If you do not use the brackets, you receive the following error message:
Run-time error '3265':

ADO could not find the object in the collection corresponding
 to the name or ordinal reference requested by the application.

PRB: Error 3265 When You Access Properties Collection
http://support.microsoft.com/?kbid=201826

http://support.microsoft.com/default.aspx?scid=kb;en-us;223212

Jennifer Gross wrote:

>Hi Gustav,
>
>I have checked all references.  The code is compiling.  I have created a
>test database with one table and one query.  It is failing in the same
>spot my original database is failing - Set prc =
>cat.Procedures("TheQuery") - In the test database I am getting the error
>3265 - Item cannot be found in the collection corresponding to the
>requested name or ordinal.  The query does exist - no spelling errors.
>The same ADO code is working fine on my home office system.  It worked
>fine at the client's site in January.  Any thoughts?
>
>Jennifer
>
>-----Original Message-----
>From: accessd-bounces at databaseadvisors.com
>[mailto:accessd-bounces at databaseadvisors.com] On Behalf Of Gustav Brock
>Sent: Monday, February 05, 2007 1:47 AM
>To: accessd at databaseadvisors.com
>Subject: Re: [AccessD] ADO code stopped working
>
>
>Hi Jennifer
>
>You could - for and while debugging - try to separate the connection
>object:
>
>    Dim cnn As ADODB.Connection
>    Dim cmd As ADODB.Command
>    Dim rst As ADODB.Recordset
>    Dim prm As ADODB.Parameter
>    Dim cat As ADOX.Catalog
>    Dim prc As ADOX.Procedure
>
>    Set cat = New ADOX.Catalog
>    Set cnn = CurrentProject.Connection
>    cat.ActiveConnection = cnn
>
>I guess you have double-checked the reference:
>  Microsoft ADO Ext. 2.8 for DDL and Security
>points to
>  ..system32\MSADOX.DLL
>
>/gustav
>
>  
>
>>>>jengross at gte.net 05-02-2007 05:00 >>>
>>>>        
>>>>
>Thanks for the suggestions.  I set the references like Marty suggested
>and am still getting the problem.  I am using the Getz Developers
>Handbook code for looping through parameters in a select query:
>
>    Dim cmd As ADODB.Command
>    Dim rst As ADODB.Recordset
>    Dim prm As ADODB.Parameter
>    Dim cat As ADOX.Catalog
>    Dim prc As ADOX.Procedure
>
>    Set cat = New ADOX.Catalog
>*   cat.ActiveConnection = CurrentProject.Connection
>*   Set prc = cat.Procedures("TheQuery")
>    Set cmd = prc.Command
>    For Each prm In cmd.Parameters
>        prm.Value = Eval(prm.Name)
>    Next prm
>    Set rst = cmd.Execute
>
>If I don't use the query with parameters, but instead base the recordset
>on the table, then it works fine:
>
>    Set rst = New ADODB.Recordset
>    Set rst.ActiveConnection = CurrentProject.Connection
>    rst.CursorType = adOpenForwardOnly
>    rst.LockType = adLockReadOnly
>    rst.Open "TheTable"
>
>I am getting the same results whether the code is in the existing FE or
>if I create a new db with the ADO code as Rocky suggested.
>
>Any thoughts?
>
>Jennifer
>
>-----Original Message-----
>From: accessd-bounces at databaseadvisors.com 
>[mailto:accessd-bounces at databaseadvisors.com] On Behalf Of Rocky Smolin
>at Beach Access Software
>Sent: Sunday, February 04, 2007 4:55 PM
>To: 'Access Developers discussion and problem solving'
>Subject: Re: [AccessD] ADO code stopped working
>
>
>I would whip up a small app with some ado code to see if the problem is
>inside your app or outside of it.  Does your app compile?
>
>Rocky
> 
>
>-----Original Message-----
>From: accessd-bounces at databaseadvisors.com 
>[mailto:accessd-bounces at databaseadvisors.com] On Behalf Of Jennifer
>Gross
>Sent: Sunday, February 04, 2007 2:05 PM
>To: AccessD List
>Subject: [AccessD] ADO code stopped working
>
>Hi Everyone,
>
>W2K SP4 / A2K SP3 / terminal server
>
>I have a database that has some DAO and some ADO code.  Recently all ADO
>stopped working.  DAO is still working fine.  Anytime code utilizing ADO
>runs it shuts down the database abruptly, leaving the LDB file.  We were
>also having problems with the Windows Management databases locking up
>and a reinstall of the latest MDAC took care of that problem, but did
>not solve the ADO problem.  ADO was working fine for end of year
>reporting.  There are no missing references.  After the MDAC reinstall I
>unchecked references, closed down, opened up and rechecked references.
>
>Any help would be greatly appreciated.
>
>Thank you,
>
>Jennifer Gross
>databasics
>2839 Shirley Drive
>Newbury Park, CA 91320-3068
>office:  (805) 480-1921
>fax:	   (805) 499-0467 
>
>  
>

-- 
Marty Connelly
Victoria, B.C.
Canada




More information about the AccessD mailing list