Jim Lawrence
accessd at shaw.ca
Mon Jun 25 19:08:32 CDT 2007
Hi Rocky: That is correct. In Grocery stores, using the latest equipment, for example, when scanning the shelves, there is just has remote hand-held scanner/pad and a central station with a wireless wedge attached. A single fellow can do an isle in about 20 minutes. There are some larger sites that have multiple handhelds with a single station that has a system which identifies which hand-held from which check-out or pad is calling and then re-directs the scanned items details back to the appropriate check-out station.... but that can be a fairly pricey configuration... though the price is coming down. All this is done with hardware and at the most, a minimum of software. The hardware just passes the information to the station as if it was being keyed in. About the most you have to do is to configure the equipment to add a LF/CR or tab to the input. You can also set the system up to send a key which may automatically drop the scanned/translated value into the field at the top of the page. All this is fairly rudimentary for a programmer of your caliber. Jim -----Original Message----- From: accessd-bounces at databaseadvisors.com [mailto:accessd-bounces at databaseadvisors.com] On Behalf Of Rocky Smolin at Beach Access Software Sent: Monday, June 25, 2007 3:50 PM To: 'Access Developers discussion and problem solving' Subject: Re: [AccessD] Wireless Scanner SO the wireless scanner is like a portable phone? You still have the 'wedge' between the keyboard and the computer, but you can roam with the scanner? Rocky -----Original Message----- From: accessd-bounces at databaseadvisors.com [mailto:accessd-bounces at databaseadvisors.com] On Behalf Of Jim Lawrence Sent: Monday, June 25, 2007 1:39 PM To: 'Access Developers discussion and problem solving' Subject: Re: [AccessD] Wireless Scanner Hi Rocky: That should be no problem. There will have to be a base station attached either to the network hub or the station that will be receiving the barcode information. In other words it is the same as a standard hardware connection for scanners. They either are directly connected to the computer or through a wedge attached to the keyboard. There may be some software/driver, if the receipt or sending unit does not already have firmware built in the handle the barcode to number conversions, with most products of this nature that is the case. HTH Jim -----Original Message----- From: accessd-bounces at databaseadvisors.com [mailto:accessd-bounces at databaseadvisors.com] On Behalf Of Rocky Smolin at Beach Access Software Sent: Monday, June 25, 2007 12:43 PM To: 'Access Developers discussion and problem solving' Subject: [AccessD] Wireless Scanner I just had a call from a prospect who wants to use wireless barcode scanning to scan part numbers. Does anyone have any experience with this? Has anyone interface one of these with an Access app? MTIA, Rocky -- AccessD mailing list AccessD at databaseadvisors.com http://databaseadvisors.com/mailman/listinfo/accessd Website: http://www.databaseadvisors.com -- AccessD mailing list AccessD at databaseadvisors.com http://databaseadvisors.com/mailman/listinfo/accessd Website: http://www.databaseadvisors.com No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: 269.9.6/865 - Release Date: 6/24/2007 8:33 AM -- AccessD mailing list AccessD at databaseadvisors.com http://databaseadvisors.com/mailman/listinfo/accessd Website: http://www.databaseadvisors.com