[AccessD] Error: Your network access was interrupted

[newsgrps at dalyn.co.nz]

Further update to this problem from the IT guy:
 
"New Switch has been put in and cabling checked, users like Cam have been 
taken off wireless. Av has been modified to remove scanning of DB. I am 
pretty confident at this point that from a networking perspective there is 
no issues here. We have not had any other issues with the system and there 
is other network related task occurring all the time. I think we have a 
compatibility issue with possibly Windows 10 and Access 2016 which is the 
common element here. One of the other guys in the office is Win 7 with 
Office 2016 and he doesn't  have any issues at all. The only difference is 
he doesn't do quoting to the same level as the other two though. I think 
these difference need to be investigated further as it will probably narrow 
down where the issues are."
 
Could the Windows 10/Access 2016 combination be a problem (grasping at 
straws).
 
Regards
 
David
 
-----Original Message-----
From: AccessD [mailto:accessd-bounces at databaseadvisors.com] On Behalf Of 
Jim Dettman
Sent: Friday, 11 November 2016 1:51 a.m.
To: 'Access Developers discussion and problem solving'
Subject: Re: [AccessD] Error: Your network access was interrupted
 
 The problem with this error is that so many things can cause it, and yes, 
it's the network in some way.  JET works fine over a solid LAN with little 
issue (and note LAN, not a WAN - can't tell you how many people try to run 
it over a WAN, which it was never designed for).   Problem is, JET will 
complain loudly long before other apps do, so it usually gets blamed for 
the problem.
 
 Besides the wireless issue (high latency), also look for NIC cards that 
have power management (go to sleep) and disable that.  Also disable any 
diagnostic protocol they might have (card disconnects from the network, 
runs its tests, then re-connects, which will drive JET nuts).
 
 If your using mapped drives, be aware that windows has a built-in timeout 
which needs to be disabled.
 
 Also have them check that DB's are not being virus scanned on the stations 
or servers.
 
 And unlike the others, I don't believe going unbound is really a 
solution.
If your going to bother to do that, then you might as well not use Access.
And for most apps it would be a total re-write anyway. 
 
 A SQL Server backend though to replace JET is certainly an option and 
usually not too much of a hill to climb.
 
Jim.
 
-----Original Message-----
From: AccessD [mailto:accessd-bounces at databaseadvisors.com] On Behalf Of 
David Emerson
Sent: Wednesday, November 09, 2016 08:31 PM
To: 'Access Developers discussion and problem solving'
Subject: [AccessD] Error: Your network access was interrupted
 
Hi Listers,
 
One of my clients is getting the following error:
 
"The expression After Update you entered as the event property setting 
produced the following error: Your network access was interrupted"
 
Does anyone have any experience with this.  Surfing indicates that it is a 
network issue rather than an Access one but I am working with another 
company in charge of the hardware and am trying to give them leads.
 
Regards
 
David Emerson
Dalyn Software Ltd
Wellington, New Zealand