[dba-SQLServer] Difference between views and queries

Arthur Fuller artful at rogers.com
Thu Jun 24 15:17:56 CDT 2004


We have serious differences of opinion here, Jim.

1. I have experimented with bound and unbound forms against SQL Server
and I firmly dispute MS's recommendation that bound forms should not be
used. I have several "major" apps running using bound forms and we're
experiencing no problems at all.

2. In a SQL environment, the concept "bound" is not quite the same as in
Access. For example, I could have a form bound to a multi-table view
(which is therefore not updateable), but that simply means that I write
some code to perform the multi-table updates. It's still a bound form.

3. I have complete control over every piece of data displayed in a bound
form. All I need to to is create the underlying view/sproc/UDF which for
example retrieves all the relevant fields from all the related tables,
then present them. This is a no-brainer once you understand how Access
will deal with it. You can create a very complex view and then AutoForm
it, and then add the update/insert code you need. Not as simple as a
one-table bound form talking to an Access table, but almost as simple.

4. Before concluding that the methods above were better than the
MS-recommended strategy, I did some benchmarks. I used a class-based
approach (i.e. a class with Get and Put methods). The performance
difference was significant. Once I saw this difference, I decided to put
my head against the grinder and deal with the issues of bound forms.
They're not perfect. Nothing is. But IMO they are WAY better than
unbound forms. It all depends on what you bind them to.

Arthur

-----Original Message-----
From: dba-sqlserver-bounces at databaseadvisors.com
[mailto:dba-sqlserver-bounces at databaseadvisors.com] On Behalf Of Jim
Lawrence (AccessD)
Sent: Friday, June 11, 2004 2:08 PM
To: dba-sqlserver at databaseadvisors.com
Subject: RE: [dba-SQLServer] Difference between views and queries


Joe:

You should know better than ask that question. It sort of stirs up
things. The following are my personnel guide-lines but they can be
changed but there has to be a very good reason.

1. Bound forms can be used on small Access projects but never on
anything major.

There are a host of pluses and minus on both side.

Facts as I see them:

Bound forms are much easier to implement. The existing operating system
handles access to records, locking, updates while multiple people are
working on a single record, populating the forms, sub-forms etc. When
there are a small number of people accessing a simple MDB database, for
example, performance can be superior.

Unbound forms are harder to implement...properly. All the above
benefits, you as the programmer, must provide. It takes longer to
implement and test. There are a whole range of programming issues that
have to be addressed. It is not for the faint-of-heart or first time
developers.

On the plus side of unbound forms, is that you now have complete control
over every piece of data that is displayed on the form or stored in the
database.

1. You can provide an extensive set of business rules, on just a single
field, if required. 2. Now that you control the data-access layer,
multiple data sources can be accessed and easily integrated. For
example; you can be using a SQL, Oracle and MDB data sources
simultaneously. 3. Data access can be merged deep within your code, so
as to provide a layer of security. (That is one of the reasons I do not
like ODBC connection because they can be easily used by any skilled
client, to gain direct access to protected data sources and because they
are exposed and not imbedded in your code.) 4. Much of the issues around
record-locking, multi-user and the potential data over-writing are
managed through the bigger data engines like SQL and Oracle. It is your
responsibility to use proper transaction controls, monitor return codes
and take appropriate actions. 5. With you now managing the data
connections, remote sites with unstable or slow access, can be carefully
handled, with virtual no data loss or database corruption. 6. Because
you now precisely handle data access, only the specific data sets
required, to populate the current form and sub-forms, are extracted.
Static data for controls can be pulled once at the beginning of a
session and not as each record is accessed. When it comes to the major
sequel databases, the raw data can be extracted, at the server end
through, Stored Procedure and functions calls. To provide better
performance the raw data can then, at the client side, be grouped and
sorted which in some cases will provide up to a seventy percent
performance boost. (Distributive computing). 7. Complete access control
of the data can leverage a small SQL system. For example; given a SQL
DB, only licensed with a dozen connections, sixty plus people can have,
as far as they are concerned, full access. More bang for the buck.

In summary, the downside is that it requires a lot more work to
implement an unbound database, internal documentation and structured
code lay-out has to be very carefully done. I can not stress tidiness
and organization enough. Consider someone who has to go back in to
update the code, that someone might be you.

The upside, is that you, as a programmer, have absolute control, garner
superior performance (on larger systems), better stability and much
better security.

This is my quarter's worth, thank you
Jim


-----Original Message-----
From: dba-sqlserver-bounces at databaseadvisors.com
[mailto:dba-sqlserver-bounces at databaseadvisors.com]On Behalf Of Joe
Rojas
Sent: Friday, June 11, 2004 5:38 AM
To: 'dba-sqlserver at databaseadvisors.com'
Subject: RE: [dba-SQLServer] Difference between views and queries


Hi Jim,

What is the argument for not using bound forms?

JR

-----Original Message-----
From: Jim Lawrence (AccessD) [mailto:accessd at shaw.ca]
Sent: Thursday, June 10, 2004 6:46 PM
To: dba-sqlserver at databaseadvisors.com
Subject: RE: [dba-SQLServer] Difference between views and queries

Hi All:

As to all these issues I would like to dump some of my own comments. At
the risk of saying 'I told you so', I firmly believe that users should:

1. Always (or should I say only), use windows authentication and
judiciously distribute security access, to your SQLxx, to only those who
need it. Appropriate passwords and time limits. 1. Never allow access to
the data except through your program. That means NO to ODBC drivers only
ADO-OLE. 2. In 99% of cases, control is handled through SPs. 3. And the
biggy never, never use bound forms to access SQLxx data. I have been
whining about that for years, a position that M$ has also fully
supported. 4. You, as the programmer, should design your program to
carefully validate all requests and data before they are posted.

I may be already talking to the converted so you can ignore this; if
not..Get on the program.

Seeing we at in the midst of an election campaign, a good stump,
political speech is the expected. Jim


-----Original Message-----
From: dba-sqlserver-bounces at databaseadvisors.com
[mailto:dba-sqlserver-bounces at databaseadvisors.com]On Behalf Of
Francisco H Tapia
Sent: Thursday, June 10, 2004 1:55 PM
To: dba-sqlserver at databaseadvisors.com
Subject: Re: [dba-SQLServer] Difference between views and queries


Andy,
  SQL Server is not Access on steriods, it's a diffrent engine, and thus
requires a new level of thinking towards your database engine.  It's NOT
that you couldn't, you can do anything, heck if you wanted to you can
set up your SQL Server with a blank SA password or SA as the password.
For all that matters, and avoiding all SQL Server authentication, just
use NT authentication and enable guest users :).

There have been quite a few white papers circulating on why you
"wouldn't" use dynamic sql w/ your sql server (check out
www.sqlservercentral.com, a fine resource) but the 2 very critical
factors include performance and also quite possible damage to your data.

It is entirely possible for your sql statement to read in this manner,
lets's say that you are Selecting Data from a table and you have a
combobox to help choose data, so your SQL Statment looks like this:

"Select CompanyName, CompanyAttribute1, pKey FROM tblCompany WHERE
CompanyAttribute1 = '" & me.cboMyBOX & "'", If I was a malicious user on
your system and I have direct access to tables, and if you're doing
statements like the above it is entirely plausible that you also have
"INSERT" statements thus you are giving more than just simple SELECT
access to these tables., thus with some malformed selection I can add
this in the select

'; DELETE FROM tblCompany; SELECT '

your final statement would look like this

Select CompanyName, CompanyAttribute1, pKey FROM tblCompany WHERE
CompanyAttribute1 = ''; DELETE FROM tblCompany; SELECT ''

Now your entire COMPANY table has been wiped out, while it is completely
possible to restore your db up to the minute, you've still lost some
downtime given that you had ONE bad apple in the bunch.

Besides the sql injection threats, you also suffer from a
NON-pre-compiled statement, thus your data could conceptually be
returned a lot faster if you let it, simply by creating a view or stored
procedure.  By the way just because you are using a stored procedure
does not make you completly excempt of sql injections, if you are using
dynamic sql within that procedure you are still open to these kind of
attacks and your stored procedure is always re-comiled and thus suffers
from the same performance deficits.


Andy Lacey wrote On 6/10/2004 1:27 PM:

>But, Francisco, if I was porting to SQL Server my Access app which 
>builds SELECT statements dynamically all of the time for many and 
>various situations are you saying I couldn't, or shouldn't or 
>something?
>
>-- Andy Lacey
>http://www.minstersystems.co.uk
>
>
>
>>-----Original Message-----
>>From: dba-sqlserver-bounces at databaseadvisors.com
>>[mailto:dba-sqlserver-bounces at databaseadvisors.com] On Behalf Of 
>>Francisco H Tapia
>>Sent: 10 June 2004 20:58
>>To: dba-sqlserver at databaseadvisors.com
>>Subject: Re: [dba-SQLServer] Difference between views and queries
>>
>>
>>jwcolby wrote On 6/10/2004 9:33 AM:
>>
>>
>>
>>>Can anyone explain the difference between a view and a query?  Views 
>>>use a query, plus the view keyword.  I have a couple of books that I 
>>>have read the chapter on Views, but I so far haven't managed
>>>
>>>
>>to "get"
>>
>>
>>>why you wouldn't just use the query itself instead of
>>>
>>>
>>turning it into a
>>
>>
>>>view.
>>>
>>>
>>>
>>>
>>A query is a request for an Access Database, however for Sql Server 
>>you would either use a View or Stored Procedure to return the data you
>>wanted... you are also able to use dynamic SQL to retrieve the
>>information you need.  ANY request given to the SQL Server engine is
>>managed by the engine, unless you are running Remote servers (iirc).
>>
>>In Sql Server, it is TABOO, nay, GENERALLY bad practice to use dynamic
>>sql because of the implication of SQL INJECTION attacks, this poses a
>>"real" security threat to your database. and your server.
>>
>>another reason to use a VIEW over dynamic sql is that it is 
>>pre-optimized by the SQL Server Engine and thus runs faster and more 
>>efficient.  Additionally if you use Dynamic SQL then your individual 
>>users who access the server will need EXPLICIT "SELECT" permissions by
>>you, which is another 'bad' practice.  In SQL Server you make data
>>available to your users via VIEWs and Stored Procedures or some other
>>secure way in order to protect your tables and it's data.
>>
>>ya get wot I mean?
>>
>>--
>>-Francisco
>>
>>
>>_______________________________________________
>>dba-SQLServer mailing list
>>dba-SQLServer at databaseadvisors.com
>>http://databaseadvisors.com/mailman/listinfo/dba-sqlserver
>>http://www.databaseadvisors.com
>>
>>
>>
>>
>>
>
>_______________________________________________
>dba-SQLServer mailing list
>dba-SQLServer at databaseadvisors.com
>http://databaseadvisors.com/mailman/listinfo/dba-sqlserver
>http://www.databaseadvisors.com
>
>
>
>


--
-Francisco


_______________________________________________
dba-SQLServer mailing list
dba-SQLServer at databaseadvisors.com
http://databaseadvisors.com/mailman/listinfo/dba-sqlserver
http://www.databaseadvisors.com

_______________________________________________
dba-SQLServer mailing list
dba-SQLServer at databaseadvisors.com
http://databaseadvisors.com/mailman/listinfo/dba-sqlserver
http://www.databaseadvisors.com



This electronic transmission is strictly confidential to TNCO, Inc. and
intended solely for the addressee. It may contain information which is
covered by legal, professional, or other privileges. If you are not the
intended addressee, or someone authorized by the intended addressee to
receive transmissions on behalf of the addressee, you must not retain,
disclose in any form, copy, or take any action in reliance on this
transmission. If you have received this transmission in error, please
notify the sender as soon as possible and destroy this message. While
TNCO, Inc. uses virus protection, the recipient should check this email
and any attachments for the presence of viruses. TNCO, Inc. accepts no
liability for any damage caused by any virus transmitted by this email.
_______________________________________________
dba-SQLServer mailing list
dba-SQLServer at databaseadvisors.com
http://databaseadvisors.com/mailman/listinfo/dba-sqlserver
http://www.databaseadvisors.com

_______________________________________________
dba-SQLServer mailing list
dba-SQLServer at databaseadvisors.com
http://databaseadvisors.com/mailman/listinfo/dba-sqlserver
http://www.databaseadvisors.com




More information about the dba-SQLServer mailing list