Jim Lawrence (AccessD)
accessd at shaw.ca
Sun Jun 27 22:31:13 CDT 2004
Hi John: Good question. The actual difference, in cost and this is a WAG, was about $6,000. Taken in perspective, that particular project extended over three months and then there was a couple of years of support fees, the additional costs were not a big percentage. Consider the thing similar to your 'frame-work'. If you had to write the whole thing from scratch, for ever contract, no one would be able to afford it. Every subsequent client benefits from the frame-work by having a feature laden, field tested piece of code. Assembling or can I say boiler-plating, an unbound form together takes no longer than many programmers would take to create the standard set of bound forms. Most of the work is up front, getting the client requirements on paper, creating the layout, setting up the server, the SQL database with it's security, roles, Stored Procedures, Views etc. Creating mockup forms (the client may what everything in purple and the client is always right :-).), the flow-charts, reporting requirements and finally getting the signed contract is by far most of the work. I have had a client who took three days just to decide on the icon at the top of each of the screens. The internal coding requires a lot of cutting, pasting, modifying the 'types', collections and list etc. There is very little original coding done. At this point the designing is very routine and structured. At the completion, the client, IMHO, ends up with a superior product. Jim -----Original Message----- From: dba-sqlserver-bounces at databaseadvisors.com [mailto:dba-sqlserver-bounces at databaseadvisors.com]On Behalf Of jwcolby Sent: Sunday, June 27, 2004 5:08 PM To: dba-sqlserver at databaseadvisors.com Subject: RE: [dba-SQLServer] Difference between views and queries > 1. Working with unlimited licenses and bound forms are not always an option. Try sixty plus users and a SQL server with a dozen connection license. Not every client can afford $10,000+, but $1,200.00+ is an easy swallow. How much did they pay to develop unbound forms and get it all working. All that "bound stuff" that just happens has to be recreated by someone! John W. Colby www.ColbyConsulting.com -----Original Message----- From: dba-sqlserver-bounces at databaseadvisors.com [mailto:dba-sqlserver-bounces at databaseadvisors.com] On Behalf Of Jim Lawrence (AccessD) Sent: Sunday, June 27, 2004 1:28 PM To: dba-sqlserver at databaseadvisors.com Subject: RE: [dba-SQLServer] Difference between views and queries Hi Arthur: Can not let you get in the last word. Please find my comments inline. Jim -----Original Message----- From: dba-sqlserver-bounces at databaseadvisors.com [mailto:dba-sqlserver-bounces at databaseadvisors.com]On Behalf Of Arthur Fuller Sent: Thursday, June 24, 2004 1:18 PM To: dba-sqlserver at databaseadvisors.com Subject: RE: [dba-SQLServer] Difference between views and queries We have serious differences of opinion here, Jim. 1. I have experimented with bound and unbound forms against SQL Server and I firmly dispute MS's recommendation that bound forms should not be used. I have several "major" apps running using bound forms and we're experiencing no problems at all. <comment> ...and I have found no problems with unbound forms. In a stable environment both techniques should be very 'problem free'. </comment> 2. In a SQL environment, the concept "bound" is not quite the same as in Access. For example, I could have a form bound to a multi-table view (which is therefore not updateable), but that simply means that I write some code to perform the multi-table updates. It's still a bound form. <comment> ...with unbound forms this is never an issues as you are handling all the access data anyways. </comment> 3. I have complete control over every piece of data displayed in a bound form. All I need to to is create the underlying view/sproc/UDF which for example retrieves all the relevant fields from all the related tables, then present them. This is a no-brainer once you understand how Access will deal with it. You can create a very complex view and then AutoForm it, and then add the update/insert code you need. Not as simple as a one-table bound form talking to an Access table, but almost as simple. <comment> ...I agree, that is a no-brainer. But there are also other ways of retrieving and handling data, especially within a 'unbound' format, that can not be fully taken advantage of within a 'bound' environment. Given one example, you can optimize data retrieval by simply assembling a dynamic recordset list of various fields, that would be used to link or find a specific form record. Once a form record is selected from this list, the entire form can then be populated. This methodology can be highly tuned to the given data set and to client's requirements. </comment> 4. Before concluding that the methods above were better than the MS-recommended strategy, I did some benchmarks. I used a class-based approach (i.e. a class with Get and Put methods). The performance difference was significant. Once I saw this difference, I decided to put my head against the grinder and deal with the issues of bound forms. They're not perfect. Nothing is. But IMO they are WAY better than unbound forms. It all depends on what you bind them to. <comment> ...My experience with connecting to SQL server with unbound forms did not result in the same experience you had. On the other hand, I have not used the 'Get' and 'Put' methods in any design. (Have you tried using the 'Getex' and 'Putex' methods which always retrieve values in an array?) I have just used the 'Insert' and 'Update' methods or passed the variable through parameters and just allowed a SP to take care of multiple tables. Are you using ODBC? I once used an ODBC connection to a SQL server and found it was a dog. Direct ADO-OLE is more appropriate. I have found when attaching new users performance remain consistent and flat. Some of the areas and reasons for using unbound forms, you have not mentioned. I assume you have only been in offices where there is unlimited connection licenses and with a very stable and simple LAN environments. 1. Working with unlimited licenses and bound forms are not always an option. Try sixty plus users and a SQL server with a dozen connection license. Not every client can afford $10,000+, but $1,200.00+ is an easy swallow. 2. Mixed environments that are using Web and Desktop forms or multiple databases or multiple database types say like SQL and Oracle, are relatively easy to setup. I could not imagine the same (relative) ease of design in bound forms. In conclusion, I agree that you can use bound forms, it is probably more simple to implement and it can be very functional but when it comes to flexibility regarding licenses, data handling, data sources and data delivery, unbound forms are unparalleled. Do not get me wrong. I do not believe that bound forms do not have their place. Their implementation is quicker for small contracts but within large complex environments unbound forms, IMHO, are faster in creation and performance. </comment> Arthur -----Original Message----- From: dba-sqlserver-bounces at databaseadvisors.com [mailto:dba-sqlserver-bounces at databaseadvisors.com] On Behalf Of Jim Lawrence (AccessD) Sent: Friday, June 11, 2004 2:08 PM To: dba-sqlserver at databaseadvisors.com Subject: RE: [dba-SQLServer] Difference between views and queries Joe: You should know better than ask that question. It sort of stirs up things. The following are my personnel guide-lines but they can be changed but there has to be a very good reason. 1. Bound forms can be used on small Access projects but never on anything major. There are a host of pluses and minus on both side. Facts as I see them: Bound forms are much easier to implement. The existing operating system handles access to records, locking, updates while multiple people are working on a single record, populating the forms, sub-forms etc. When there are a small number of people accessing a simple MDB database, for example, performance can be superior. Unbound forms are harder to implement...properly. All the above benefits, you as the programmer, must provide. It takes longer to implement and test. There are a whole range of programming issues that have to be addressed. It is not for the faint-of-heart or first time developers. On the plus side of unbound forms, is that you now have complete control over every piece of data that is displayed on the form or stored in the database. 1. You can provide an extensive set of business rules, on just a single field, if required. 2. Now that you control the data-access layer, multiple data sources can be accessed and easily integrated. For example; you can be using a SQL, Oracle and MDB data sources simultaneously. 3. Data access can be merged deep within your code, so as to provide a layer of security. (That is one of the reasons I do not like ODBC connection because they can be easily used by any skilled client, to gain direct access to protected data sources and because they are exposed and not imbedded in your code.) 4. Much of the issues around record-locking, multi-user and the potential data over-writing are managed through the bigger data engines like SQL and Oracle. It is your responsibility to use proper transaction controls, monitor return codes and take appropriate actions. 5. With you now managing the data connections, remote sites with unstable or slow access, can be carefully handled, with virtual no data loss or database corruption. 6. Because you now precisely handle data access, only the specific data sets required, to populate the current form and sub-forms, are extracted. Static data for controls can be pulled once at the beginning of a session and not as each record is accessed. When it comes to the major sequel databases, the raw data can be extracted, at the server end through, Stored Procedure and functions calls. To provide better performance the raw data can then, at the client side, be grouped and sorted which in some cases will provide up to a seventy percent performance boost. (Distributive computing). 7. Complete access control of the data can leverage a small SQL system. For example; given a SQL DB, only licensed with a dozen connections, sixty plus people can have, as far as they are concerned, full access. More bang for the buck. In summary, the downside is that it requires a lot more work to implement an unbound database, internal documentation and structured code lay-out has to be very carefully done. I can not stress tidiness and organization enough. Consider someone who has to go back in to update the code, that someone might be you. The upside, is that you, as a programmer, have absolute control, garner superior performance (on larger systems), better stability and much better security. This is my quarter's worth, thank you Jim -----Original Message----- From: dba-sqlserver-bounces at databaseadvisors.com [mailto:dba-sqlserver-bounces at databaseadvisors.com]On Behalf Of Joe Rojas Sent: Friday, June 11, 2004 5:38 AM To: 'dba-sqlserver at databaseadvisors.com' Subject: RE: [dba-SQLServer] Difference between views and queries Hi Jim, What is the argument for not using bound forms? JR -----Original Message----- From: Jim Lawrence (AccessD) [mailto:accessd at shaw.ca] Sent: Thursday, June 10, 2004 6:46 PM To: dba-sqlserver at databaseadvisors.com Subject: RE: [dba-SQLServer] Difference between views and queries Hi All: As to all these issues I would like to dump some of my own comments. At the risk of saying 'I told you so', I firmly believe that users should: 1. Always (or should I say only), use windows authentication and judiciously distribute security access, to your SQLxx, to only those who need it. Appropriate passwords and time limits. 1. Never allow access to the data except through your program. That means NO to ODBC drivers only ADO-OLE. 2. In 99% of cases, control is handled through SPs. 3. And the biggy never, never use bound forms to access SQLxx data. I have been whining about that for years, a position that M$ has also fully supported. 4. You, as the programmer, should design your program to carefully validate all requests and data before they are posted. I may be already talking to the converted so you can ignore this; if not..Get on the program. Seeing we at in the midst of an election campaign, a good stump, political speech is the expected. Jim -----Original Message----- From: dba-sqlserver-bounces at databaseadvisors.com [mailto:dba-sqlserver-bounces at databaseadvisors.com]On Behalf Of Francisco H Tapia Sent: Thursday, June 10, 2004 1:55 PM To: dba-sqlserver at databaseadvisors.com Subject: Re: [dba-SQLServer] Difference between views and queries Andy, SQL Server is not Access on steriods, it's a diffrent engine, and thus requires a new level of thinking towards your database engine. It's NOT that you couldn't, you can do anything, heck if you wanted to you can set up your SQL Server with a blank SA password or SA as the password. For all that matters, and avoiding all SQL Server authentication, just use NT authentication and enable guest users :). There have been quite a few white papers circulating on why you "wouldn't" use dynamic sql w/ your sql server (check out www.sqlservercentral.com, a fine resource) but the 2 very critical factors include performance and also quite possible damage to your data. It is entirely possible for your sql statement to read in this manner, lets's say that you are Selecting Data from a table and you have a combobox to help choose data, so your SQL Statment looks like this: "Select CompanyName, CompanyAttribute1, pKey FROM tblCompany WHERE CompanyAttribute1 = '" & me.cboMyBOX & "'", If I was a malicious user on your system and I have direct access to tables, and if you're doing statements like the above it is entirely plausible that you also have "INSERT" statements thus you are giving more than just simple SELECT access to these tables., thus with some malformed selection I can add this in the select '; DELETE FROM tblCompany; SELECT ' your final statement would look like this Select CompanyName, CompanyAttribute1, pKey FROM tblCompany WHERE CompanyAttribute1 = ''; DELETE FROM tblCompany; SELECT '' Now your entire COMPANY table has been wiped out, while it is completely possible to restore your db up to the minute, you've still lost some downtime given that you had ONE bad apple in the bunch. Besides the sql injection threats, you also suffer from a NON-pre-compiled statement, thus your data could conceptually be returned a lot faster if you let it, simply by creating a view or stored procedure. By the way just because you are using a stored procedure does not make you completly excempt of sql injections, if you are using dynamic sql within that procedure you are still open to these kind of attacks and your stored procedure is always re-comiled and thus suffers from the same performance deficits. Andy Lacey wrote On 6/10/2004 1:27 PM: >But, Francisco, if I was porting to SQL Server my Access app which >builds SELECT statements dynamically all of the time for many and >various situations are you saying I couldn't, or shouldn't or >something? > >-- Andy Lacey >http://www.minstersystems.co.uk > > > >>-----Original Message----- >>From: dba-sqlserver-bounces at databaseadvisors.com >>[mailto:dba-sqlserver-bounces at databaseadvisors.com] On Behalf Of >>Francisco H Tapia >>Sent: 10 June 2004 20:58 >>To: dba-sqlserver at databaseadvisors.com >>Subject: Re: [dba-SQLServer] Difference between views and queries >> >> >>jwcolby wrote On 6/10/2004 9:33 AM: >> >> >> >>>Can anyone explain the difference between a view and a query? Views >>>use a query, plus the view keyword. I have a couple of books that I >>>have read the chapter on Views, but I so far haven't managed >>> >>> >>to "get" >> >> >>>why you wouldn't just use the query itself instead of >>> >>> >>turning it into a >> >> >>>view. >>> >>> >>> >>> >>A query is a request for an Access Database, however for Sql Server >>you would either use a View or Stored Procedure to return the data you >>wanted... you are also able to use dynamic SQL to retrieve the >>information you need. ANY request given to the SQL Server engine is >>managed by the engine, unless you are running Remote servers (iirc). >> >>In Sql Server, it is TABOO, nay, GENERALLY bad practice to use dynamic >>sql because of the implication of SQL INJECTION attacks, this poses a >>"real" security threat to your database. and your server. >> >>another reason to use a VIEW over dynamic sql is that it is >>pre-optimized by the SQL Server Engine and thus runs faster and more >>efficient. Additionally if you use Dynamic SQL then your individual >>users who access the server will need EXPLICIT "SELECT" permissions by >>you, which is another 'bad' practice. In SQL Server you make data >>available to your users via VIEWs and Stored Procedures or some other >>secure way in order to protect your tables and it's data. >> >>ya get wot I mean? >> >>-- >>-Francisco >> >> >>_______________________________________________ >>dba-SQLServer mailing list >>dba-SQLServer at databaseadvisors.com >>http://databaseadvisors.com/mailman/listinfo/dba-sqlserver >>http://www.databaseadvisors.com >> >> >> >> >> > >_______________________________________________ >dba-SQLServer mailing list >dba-SQLServer at databaseadvisors.com >http://databaseadvisors.com/mailman/listinfo/dba-sqlserver >http://www.databaseadvisors.com > > > > -- -Francisco _______________________________________________ dba-SQLServer mailing list dba-SQLServer at databaseadvisors.com http://databaseadvisors.com/mailman/listinfo/dba-sqlserver http://www.databaseadvisors.com _______________________________________________ dba-SQLServer mailing list dba-SQLServer at databaseadvisors.com http://databaseadvisors.com/mailman/listinfo/dba-sqlserver http://www.databaseadvisors.com This electronic transmission is strictly confidential to TNCO, Inc. and intended solely for the addressee. It may contain information which is covered by legal, professional, or other privileges. If you are not the intended addressee, or someone authorized by the intended addressee to receive transmissions on behalf of the addressee, you must not retain, disclose in any form, copy, or take any action in reliance on this transmission. If you have received this transmission in error, please notify the sender as soon as possible and destroy this message. While TNCO, Inc. uses virus protection, the recipient should check this email and any attachments for the presence of viruses. TNCO, Inc. accepts no liability for any damage caused by any virus transmitted by this email. _______________________________________________ dba-SQLServer mailing list dba-SQLServer at databaseadvisors.com http://databaseadvisors.com/mailman/listinfo/dba-sqlserver http://www.databaseadvisors.com _______________________________________________ dba-SQLServer mailing list dba-SQLServer at databaseadvisors.com http://databaseadvisors.com/mailman/listinfo/dba-sqlserver http://www.databaseadvisors.com _______________________________________________ dba-SQLServer mailing list dba-SQLServer at databaseadvisors.com http://databaseadvisors.com/mailman/listinfo/dba-sqlserver http://www.databaseadvisors.com _______________________________________________ dba-SQLServer mailing list dba-SQLServer at databaseadvisors.com http://databaseadvisors.com/mailman/listinfo/dba-sqlserver http://www.databaseadvisors.com _______________________________________________ dba-SQLServer mailing list dba-SQLServer at databaseadvisors.com http://databaseadvisors.com/mailman/listinfo/dba-sqlserver http://www.databaseadvisors.com