Bill Patten
bill_patten at embarqmail.com
Fri May 30 12:19:37 CDT 2008
Susan, There is a video on YouTube that describes how to setup a D-link, but that your manual and what you already know will probably help you set it up. http://www.youtube.com/watch?v=9UFh0W_Z3kI As always there are lots of people on this list that can help you with the smaller details. Bill ----- Original Message ----- From: "Susan Harkins" <ssharkins at gmail.com> To: "Discussion of Hardware and Software issues" <dba-tech at databaseadvisors.com> Sent: Friday, May 30, 2008 9:47 AM Subject: Re: [dba-Tech] wireless invasion That did it, and I was able to get in using the default admin and "" password -- not good. I know that I ran that friggin wizard when I installed the router! ;( I don't know whether to run the setup wizard or take the manual route -- advice? Since I don't know what I'm doing, I'm inclined to use the wizard, but I did that before and look where I am! Susan H. > Linksys uses 192.168.1.1 for it's default but can be changed. An easy way > to > tell, is to go to the dos prompt (CMD) type IPCONFIG and look at the > default > gateway. That should be the IP address for the router. If you do not have > the manual, you can usually find the password stuff by typing the model > number and password in GOOGLE. If you have changed the password and can't > remember it, you can usually reset the router to it's defaults by pushing > a > button, or other series of events again available on Google. > > HTH > > Bill > > ----- Original Message ----- > From: "Steve Erbach" <erbachs at gmail.com> > To: "Discussion of Hardware and Software issues" > <dba-tech at databaseadvisors.com> > Sent: Friday, May 30, 2008 3:32 AM > Subject: Re: [dba-Tech] wireless invasion > > > Susan, > > Forgot to mention that communicating with your own wireless router via > browser will require some form of 192.168.0.1. I have a D-Link > router. I believe that Linksys routers use 192.168.1.0 ... in any > event, something very similar. The proper IP address should be shown > in the router's manual. > > Steve Erbach > > On Thu, May 29, 2008 at 9:39 AM, Susan Harkins <ssharkins at gmail.com> > wrote: >> I'm using a wireless router to connect to a second computer. The main >> computer uses cable internet via a regular modem. >> >> The second computer is running Vista and almost daily shows activity that >> isn't mine -- downloads, changes to email preferences -- some weird >> stuff. >> My first thought is that someone's using the wireless connection, but I'm >> not seeing evidence of this on the main computer -- just the one that >> actually connects via the wireless. >> >> I'm running the Windows firewall and when I installed the wireless >> router, >> I secured it properly. >> >> I don't know where to begin to troubleshoot this problem. Any help? >> >> Susan H. >> _______________________________________________ > _______________________________________________ > dba-Tech mailing list > dba-Tech at databaseadvisors.com > http://databaseadvisors.com/mailman/listinfo/dba-tech > Website: http://www.databaseadvisors.com > > _______________________________________________ > dba-Tech mailing list > dba-Tech at databaseadvisors.com > http://databaseadvisors.com/mailman/listinfo/dba-tech > Website: http://www.databaseadvisors.com _______________________________________________ dba-Tech mailing list dba-Tech at databaseadvisors.com http://databaseadvisors.com/mailman/listinfo/dba-tech Website: http://www.databaseadvisors.com