[dba-Tech] make USB-stick bootable - 1st fail

I have now gone through this exercise.
everything was as expected, except for the last step, where the BartPE has 
to be put on the stick with the command

pe2usb -f d:

here it tells me the stick is too big (it is 16 G) and it is FAT32 and it 
cannot be formated to FAT or FAT16

also, when I try to format it in explorer, it only allows FAT32

now what? any idea?

Lembit

----- Original Message ----- 
From: "Rocky Smolin" <rockysmolin at bchacc.com>
To: "'Discussion of Hardware and Software issues'" 
<dba-tech at databaseadvisors.com>
Sent: Wednesday, October 14, 2009 6:21 PM
Subject: Re: [dba-Tech] make USB-stick bootable


> Check this out - #2:  http://blogs.techrepublic.com.com/10things/?p=931
>
> Rocky
>
>
> -----Original Message-----
> From: dba-tech-bounces at databaseadvisors.com
> [mailto:dba-tech-bounces at databaseadvisors.com] On Behalf Of Lembit Soobik
> Sent: Wednesday, October 14, 2009 9:00 AM
> To: Discussion of Hardware and Software issues
> Subject: [dba-Tech] make USB-stick bootable
>
>
> what's the easiest way to make an USB-stick bootable (to put WinXP on it)?
> I have found a website which seems pretty complicated, using an HP 
> software
> and pulling some files from a win server sp1 and cooking it all ... :) is
> there some easier way?
>
> thank you
> Lembit
>
> _______________________________________________
> dba-Tech mailing list
> dba-Tech at databaseadvisors.com
> http://databaseadvisors.com/mailman/listinfo/dba-tech
> Website: http://www.databaseadvisors.com
>
> _______________________________________________
> dba-Tech mailing list
> dba-Tech at databaseadvisors.com
> http://databaseadvisors.com/mailman/listinfo/dba-tech
> Website: http://www.databaseadvisors.com