Tydda Jon - Slough
jon.tydda at lonza.com
Thu Apr 28 09:04:40 CDT 2011
Take one of the other drives out too, and tell him he's lost all his data, but that you can get it all back for a $200 outlay? :-) Jon -----Original Message----- From: dba-tech-bounces at databaseadvisors.com [mailto:dba-tech-bounces at databaseadvisors.com] On Behalf Of Steve Erbach Sent: 28 April 2011 14:35 To: Discussion of Hardware and Software issues Subject: Re: [dba-Tech] RAID 5 repair Jim, >> Once you are ready to start just inform the owner of the requirements >> and the estimated costs and ask for the keys. He will either say just go ahead or say no. << Heh! I've been working with this guy since '91 or '92. That's why I facetiously asked in my first message about slapping some sense into his head. He waits on EVERYTHING. In all the time I've known him he has NEVER considered buying even semi-adequate backup for his servers. His "backup" consists of a weekly XCOPY of the contents of his network data drive to one of the workstations on the network. That's it. So getting him to spend $30 or $40 to replace a RAID drive? Hardly seems worth it, don't you think? My God! I had to virtually beg him to spend $21 on PC Tools Registry Mechanic (which I swear by) to help fix some registry issues on an infected workstation...and he only did it because I promised to reimburse him if it didn't fix the issue. (It didn't, by the way, so I reimbursed him. Had to find something on-line, a REG file that re-established the EXE file association on an XP PC that had been attacked.) Anyway, I feel like buying the drives myself and hiding the charge in my next invoice just so he doesn't have to take the effort to buy the drives himself. I suggested that he purchase four right away and then swap them into the array one by one over successive weekends. He knows all this...but he still dithers about spending maybe $120 for four drives. Gad! Thank you, Jim. Steve Erbach Neenah, WI On Wed, Apr 27, 2011 at 8:22 PM, Jim Lawrence <accessd at shaw.ca> wrote: > Most RAIDS have a default process keystroke combination during the > bootup sequence like <Ctrl-A>. This either accesses the motherboard > ROM or the ROM on the RAID controller. From there it should be a > simply selection menu to choose the newly installed drive and run the format and striping process. > > Before you do anything check the web for any oddities or info you need > to know on the drives and RAID controller...some have issues that > should be addressed like new firm upgrades, incompatibility issues and > configuration cautions etc. Some of the older drive sizes and > configurations like a type of SCSI or IDE are hard to find today. > > Once you have found the right combination and the appropriate > equipment note the process times needed to synchronize a new added > drive. Sometimes the process can take as much as 12 hours so be aware > that the weekend would be the best time to start such a process as in > the worse case scenario there is still time to recover from a crashed drive or something like that. > > Once you are ready to start just inform the owner of the requirements > and the estimated costs and ask for the keys. He will either say just > go ahead or say no. > > Also check with Drew as he appears to have had a fair bit of recent > experience with setting up a RAID 5 system. > > Jim > > > > -----Original Message----- > From: dba-tech-bounces at databaseadvisors.com > [mailto:dba-tech-bounces at databaseadvisors.com] On Behalf Of Steve > Erbach > Sent: Wednesday, April 27, 2011 3:51 PM > To: Discussion of Hardware and Software issues > Subject: [dba-Tech] RAID 5 repair > > Dear Group, > > My client that I'm having trouble with the VPN/Remote Desktop also has > a dead RAID 5 drive. It's a four drive array and the three remaining > drives are doing what they're supposed to be doing. I've given drive > replacement info to my client (the drives are CHEAP) but he hasn't > bought any yet. > > My question is (besides how do I slap some sense into his thick > head!): is there any preparation I need to do with the drive before I > slot it in and allow the RAID controller to re-synch the drive array? > That is, format it or something? Or does the RAID controller take > care of that after I've installed the new drive? > > It's an HP server that's about 4-5 years old using drives like the > following: > > COMPAQ BF03664664 > (http://www.serversupply.com/HARD%20DRIVES%20W-TRAY/ULTRA160-SCSI/36GB > -15000 > RPM/HP-COMPAQ/BF03664664.htm) > > Any thoughts or advice? Thanks. > > Regards, > > Steve Erbach _______________________________________________ dba-Tech mailing list dba-Tech at databaseadvisors.com http://databaseadvisors.com/mailman/listinfo/dba-tech Website: http://www.databaseadvisors.com This communication and its attachments, if any, may contain confidential and privileged information the use of which by other persons or entities than the intended recipient is prohibited. If you receive this transmission in error, please contact the sender immediately and delete the material from your system.