Bill Patten
bill_patten at embarqmail.com
Mon Jul 18 19:18:11 CDT 2011
I'm like you, it no video on built in graphics I'd assume it wasn't causing the problem but I suppose it could be grabbing memory. I found this on line, obviously I can't vouch for its accuracy. URL http://www.vistaarticles.com/articles/474/1/How-to-Remove-ATI-PCI-Express-(3GIO)-Filter-Driver/print/474 Message How to Remove ATI PCI Express (3GIO) Filter Driver Do NOT install ATI PCI Express (3GIO) Filter Driver. Your graphics card will stop working and in device manager under Display Adapters you will get the following error: This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code 12) How to Remove: 1. Device Manager 2. System Devices 3. Right Click ATI PCI Express (3GIO) Filter Driver and select Uninstall. 4. Tick Delete the driver software for this device (IMPORTANT) 5. OK HTH Bill -------------------------------------------------- From: "Rocky Smolin" <rockysmolin at bchacc.com> Sent: Monday, July 18, 2011 5:00 PM To: "'Discussion of Hardware and Software issues'" <dba-tech at databaseadvisors.com> Subject: Re: [dba-Tech] Graphics controller problem There is one but it doesn't show on the device manager and when I plug one of the monitors into it, there's nothing on the screen, so I'm assuming it's disabled. Rocky -----Original Message----- From: dba-tech-bounces at databaseadvisors.com [mailto:dba-tech-bounces at databaseadvisors.com] On Behalf Of Bill Patten Sent: Monday, July 18, 2011 3:45 PM To: Discussion of Hardware and Software issues Subject: Re: [dba-Tech] Graphics controller problem Hi again, I doubt this will help either but any chance there is a built in video card on the PC that needs to be disabled? Bill -------------------------------------------------- From: "Rocky Smolin" <rockysmolin at bchacc.com> Sent: Monday, July 18, 2011 3:38 PM To: "List" <dba-tech at databaseadvisors.com>; "'Off Topic'" <dba-ot at databaseadvisors.com> Subject: [dba-Tech] Graphics controller problem Dear Lists: I moved a dual monitor graphics card - ATI Radeon XPRESS 200 Series - from my old XP machine to another machine running W7 Ultimate 32 bit where is will not operate correctly. Device manager says Code 12 This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code 12) Recommended resolution Two devices have been assigned the same I/O ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller is not an interrupt from the BIOS because of a corrupted Multiprocessor System (MPS) table). You can use Device Manager to determine where the conflict is and disable the conflicting device. On the General Properties tab of the device, click Troubleshoot to start the Troubleshooting Wizard. Location is PCI bus 1, device 5, function 0. I can't find another device in conflict with this one. And there's no Troubleshoot command button on the General Properties tab. Any ideas on where to start to resolve this problem? Both monitors are plugged into the card - only one is operating. TIA Rocky _______________________________________________ dba-Tech mailing list dba-Tech at databaseadvisors.com http://databaseadvisors.com/mailman/listinfo/dba-tech Website: http://www.databaseadvisors.com _______________________________________________ dba-Tech mailing list dba-Tech at databaseadvisors.com http://databaseadvisors.com/mailman/listinfo/dba-tech Website: http://www.databaseadvisors.com _______________________________________________ dba-Tech mailing list dba-Tech at databaseadvisors.com http://databaseadvisors.com/mailman/listinfo/dba-tech Website: http://www.databaseadvisors.com