[dba-Tech] Boot to command line in Windows 7

[Gary Kjos]

You can just pull the hard drive or drives out and put it into a
docking station connected to another system of your choice

Docking stations are cheap.

GK

On Wed, Feb 9, 2022 at 8:12 PM Arthur Fuller <fuller.artful at gmail.com> wrote:
>
> Problem solved, at least in part. The box boots into windows7 once again,
> and thanks to an external burner I can back up everything again (just to be
> sure). The box still has a problem booting and even reading from the
> burner, but maybe I can get around that too. It*'s not really an issue
> anymore; the box dates from the era when a 250 GB drive was serious LOL.
> But still, for nostalgia if nothing else, I'll keep this old girl around.*
>
> On Wed, Feb 9, 2022 at 2:30 PM Kathryn Bassett <kathryn at bassett.net> wrote:
>
> > At least on a Dell, when you first start booting, start tapping F12 or F2
> > over and over again to get to the bios. For other brands, see the list here:
> >
> > https://www.tomshardware.com/reviews/bios-keys-to-access-your-firmware,5732.html
> > Kathryn
> >
> > > -----Original Message-----
> > > From: dba-Tech <dba-tech-
> > > bounces+kathryn=bassett.net at databaseadvisors.com> On Behalf Of Arthur
> > > Fuller
> > > Sent: Wednesday, February 9, 2022 9:17 AM
> > > To: Discussion of Hardware and Software issues <dba-
> > > tech at databaseadvisors.com>
> > > Subject: Re: [dba-Tech] Boot to command line in Windows 7
> > >
> > > I oversimplified the problem(s). First, how can I create a recovery disk
> > or
> > > USB? Second, how can I get to the BIOS to change the boot order? Third,
> > > when the machine starts it tries to load Windows 7 and then almost
> > > immediately runs chkdsk. Ctrl+Break doesn't stop this. Fourth, although
> > the
> > > DVD burner seems to work fine, I cannot boot from it.
> > >
> > > This is taking more hours than the old box is worth, so perhaps i's time
> > to
> > > bury it and move on
> > >
> > > On Wed, Feb 9, 2022 at 10:20 AM Gustav Brock via dba-Tech < dba-
> > > tech at databaseadvisors.com> wrote:
> > >
> > > > Hi Arthur
> > > >
> > > > Create a "recovery disk" - cd-rom or USB key - in Windows 7, then boot
> > > > using that.
> > > > When booted, go to Repair my computer, and select Command prompt.
> > > >
> > > > /gustav
> > > >
> > > > -----Oprindelig meddelelse-----
> > > > Fra: dba-Tech <dba-tech-
> > > bounces+gustav=cactus.dk at databaseadvisors.com>
> > > > På vegne af Arthur Fuller
> > > > Sendt: 9. februar 2022 16:00
> > > > Til: Discussion of Hardware and Software issues <
> > > > dba-tech at databaseadvisors.com>
> > > > Emne: [dba-Tech] Boot to command line in Windows 7
> > > >
> > > > I have an ancient box with win 7. I want to boot directly to the
> > > > command ine, skipping Windows, so I can run chksk /f.
> > > >
> > > > Thanks.
> > > >
> > > > --
> > > > Arthur
> > > > _______________________________________________
> > > > dba-Tech mailing list
> > > > dba-Tech at databaseadvisors.com
> > > > https://databaseadvisors.com/mailman/listinfo/dba-tech
> > > > Website: http://www.databaseadvisors.com
> > > >
> > >
> > >
> > > --
> > > Arthur
> > > _______________________________________________
> > > dba-Tech mailing list
> > > dba-Tech at databaseadvisors.com
> > > https://databaseadvisors.com/mailman/listinfo/dba-tech
> > > Website: http://www.databaseadvisors.com
> >
> > _______________________________________________
> > dba-Tech mailing list
> > dba-Tech at databaseadvisors.com
> > https://databaseadvisors.com/mailman/listinfo/dba-tech
> > Website: http://www.databaseadvisors.com
> >
>
>
> --
> Arthur
> _______________________________________________
> dba-Tech mailing list
> dba-Tech at databaseadvisors.com
> https://databaseadvisors.com/mailman/listinfo/dba-tech
> Website: http://www.databaseadvisors.com



-- 
Gary Kjos
garykjos at gmail.com