Mark A Matte
markamatte at hotmail.com
Wed Feb 2 12:10:32 CST 2005
Ok...I think I'm getting real close here. I found that if I change my SQL
to look for case IDs less than 100...the code runs fine until I get to a 2
digit case number (10)...and then I get the error described below. Here is
a copy of the code. Any ideas?
Thanks,
Mark
**********************************************
Dim rsRecordset As ADODB.Recordset
Dim cnConnection As ADODB.Connection
Dim strConnectionString As String
Dim strSQL As String
' instantiate data objects
Set rsRecordset = New ADODB.Recordset
Set cnConnection = New ADODB.Connection
' connection string
strConnectionString =
"DSN=;UID=;PWD=;DATABASE=;HOST=;SRVR=;SERV=;PRO=onsoctcp;"
'**** ' opne connection
cnConnection.Open strConnectionString
' query
strSQL = "SELECT case_id FROM ps_rc_case WHERE case_id <100;"
rsRecordset.Open strSQL, cnConnection, adOpenKeyset, adLockReadOnly
' loop through recordset
Do While Not rsRecordset.EOF
Debug.Print rsRecordset("case_id") '***HERE IS THE PROBLEM
rsRecordset.MoveNext
Loop
***************************************
>From: Tom Bolton <tom.bolton at donnslaw.co.uk>
>Reply-To: Access Developers discussion and problem
>solving<accessd at databaseadvisors.com>
>To: "'Access Developers discussion and problem
>solving'"<accessd at databaseadvisors.com>
>Subject: RE: [AccessD] Data from Informix to Access - dirty reads?
>Date: Wed, 2 Feb 2005 10:19:42 -0000
>
>Mark
>
>Just found this connection string for OLE DB:
>
>Provider=Ifxoledbc.2;password=myPw;User ID=myUser;Data
>Source=dbName at serverName;
>
>Might work if you're using OLE DB drivers?
>
>Cheers
>Tom
>
>
>
>-----Original Message-----
>From: Mark A Matte [mailto:markamatte at hotmail.com]
>Sent: 31 January 2005 16:02
>To: accessd at databaseadvisors.com
>Subject: RE: [AccessD] Data from Informix to Access - dirty reads?
>
>Tom,
>
>Below is the SQL( with changes you suggested) and where I'm hitting a
>problem:
> strSQL = "SELECT case_id FROM ps_rc_case WHERE case_id = 100;"
> rsRecordset.Open strSQL, cnConnection, adOpenKeyset, adLockReadOnly
> Do While Not rsRecordset.EOF
> Debug.Print rsRecordset("case_id") 'HERE IS WHERE I GET THE ERROR
> rsRecordset.MoveNext
> Loop
>
>****************
>Any suggestions?
>
>Thanks,
>
>Mark
>
>P.S...No Legal software...just pulling some adhoc volume from a reporting
>DB.
>
> >From: Tom Bolton <tom.bolton at donnslaw.co.uk>
> >Reply-To: Access Developers discussion and problem
> >solving<accessd at databaseadvisors.com>
> >To: "'Access Developers discussion and problem
> >solving'"<accessd at databaseadvisors.com>
> >Subject: RE: [AccessD] Data from Informix to Access - dirty reads?
> >Date: Mon, 31 Jan 2005 14:39:01 -0000
> >
> >Mark
> >
> >I take it your connection is opening without error?
> >
> >Are you referencing the tablename in the recordset field, i.e.
> >rsResults("ps_rc_case.case_id")? ADO doesn't like this, just leave out
>the
> >tablename i.e. rsResults("case_id") for the time being and see if that
> >gives
> >you any more luck. You can also reference recordset fields using integer
> >ordinals i.e. rsResults(1) or rsResults.Fields(1) - Fields is the default
> >(collection) property.
> >
> >Also, try leaving out the brackets () from your SQL query that Access so
> >loves to randomly insert.
> >
> >If you can, download a program called WinSQL
> >(http://www.synametrics.com/winsql ). You can use this Enterprise
> >Manager-style tool test out your queries before you try and pull the data
> >with ADO - I've found it's a great help.
> >
> >BTW (just out of plain curiosity), you're not working on any kind of
> >law/legal firm software are you?
> >
> >Cheers
> >Tom
> >
> >
> >
> >
> >
> >
> >
> >-----Original Message-----
> >From: Mark A Matte [mailto:markamatte at hotmail.com]
> >Sent: 31 January 2005 14:13
> >To: accessd at databaseadvisors.com
> >Subject: RE: [AccessD] Data from Informix to Access - dirty reads?
> >
> >Tom,
> >
> >Just for testing...I tried to pull 1 record and 1 field using:
> >strSQL = "SELECT ps_rc_case.case_id FROM ps_rc_case WHERE
> >(((ps_rc_case.case_id) = 100));"
> >
> >Any ideas?
> >
> >Thanks, Again,
> >
> >Mark
> >
> > >From: Tom Bolton <tom.bolton at donnslaw.co.uk>
> > >Reply-To: Access Developers discussion and problem
> > >solving<accessd at databaseadvisors.com>
> > >To: "'Access Developers discussion and problem
> > >solving'"<accessd at databaseadvisors.com>
> > >Subject: RE: [AccessD] Data from Informix to Access - dirty reads?
> > >Date: Mon, 31 Jan 2005 10:14:24 -0000
> > >
> > >Hi Mark
> > >
> > >What does your SQL query look like?
> > >
> > >Cheers,
> > >Tom
> > >
> > >
> > >-----Original Message-----
> > >From: Mark A Matte [mailto:markamatte at hotmail.com]
> > >Sent: 28 January 2005 17:41
> > >To: accessd at databaseadvisors.com
> > >Subject: RE: [AccessD] Data from Informix to Access - dirty reads?
> > >
> > >Ok...I think I'm almost there. With a little tweaking I've made it to:
> > >Debug.Print rsRecordset("myField1") 'etc...
> > >
> > >Then I get this error:"Multiple-step OLE DB operation generated errors.
> > >Check eash OLE DB status value, if available. No work was done."
> > >
> > >Any suggestions?
> > >
> > >Thanks,
> > >
> > >Mark
> > >
> > >
> > > >From: Tom Bolton <tom.bolton at donnslaw.co.uk>
> > > >Reply-To: Access Developers discussion and problem
> > > >solving<accessd at databaseadvisors.com>
> > > >To: "'Access Developers discussion and problem
> > > >solving'"<accessd at databaseadvisors.com>
> > > >Subject: RE: [AccessD] Data from Informix to Access - dirty reads?
> > > >Date: Fri, 28 Jan 2005 09:38:07 -0000
> > > >
> > > >Mark
> > > >
> > > >No probs, the following will retrieve data into an ADO recordset.
> >Check
> > > >the
> > > >syntax first mind, as I'm just freestyling this into my email
>editor...
> > > >
> > > > Dim rsRecordset as ADODB.Recordset
> > > > Dim cnConnection as ADODB.Connection
> > > >
> > > > Dim strConnectionString as String
> > > > Dim strSQL as String
> > > >
> > > > ' instantiate data objects
> > > > set rsRecordset = New ADODB.Recordset
> > > > Set cnConnection = New ADODB.Connection
> > > >
> > > > ' connection string
> > > > strConnectionString =
> > >
> >
> >"DSN=mydsn;UID=myUID;PWD=myPWD;DATABASE=myDB;HOST=myHost;SRVR=myServer;SERV
> > >=
> > > >myPortNumber;PRO=onsoctcp;"
> > > >
> > > > ' opne connection
> > > > cnConnection.Open strConnectionString
> > > >
> > > > ' query
> > > > strSQL = "SELECT blah blah FROM yadda yadda WHERE some things"
> > > >
> > > > ' pull records
> > > > ' keyset cursor type is compatible with DAO
> > > > rsRecordset.open strSQL, cnConnection, adOpenKeyset, adLockReadOnly
> > > >
> > > >
> > > > ' loop through recordset
> > > > Do While Not rsRecordset.EOF
> > > >
> > > > Debug.Print rsRecordset("myField1") 'etc...
> > > >
> > > > rsRecordset.MoveNext
> > > >
> > > > Loop
> > > >
> > > >
> > > >This should get you started - remember,
> >http://www.connectionstrings.com
> > >if
> > > >you get stuck on the connection string. You'll need a reference set
>to
> > >MS
> > > >ActiveX Data Objects.
> > > >
> > > >HTH
> > > >Tom
> > > >
> > > >
> > > >
> > > >-----Original Message-----
> > > >From: Mark A Matte [mailto:markamatte at hotmail.com]
> > > >Sent: 27 January 2005 19:56
> > > >To: accessd at databaseadvisors.com
> > > >Subject: RE: [AccessD] Data from Informix to Access - dirty reads?
> > > >
> > > >Tom,
> > > >
> > > >">Mark - instead of using APPEND queries, would it not be any faster
>to
> > > >pull
> > > > >the data from Informix in an ADO recordset - I'm doing this via
>ODBC
> >as
> > > > >this
> > > > >is how our Terminal Servers are set up >:¬( - then open a DAO
> >recordset
> > > >on
> > > > >your Access table, and loop round in a do...while copying the
>records
> > > >from
> > > > >one to the other"
> > > >
> > > >I've never used ADO...can you send a sample of code?
> > > >
> > > >Thanks,
> > > >
> > > >Mark
> > > >
> > > >
> > > > >From: Tom Bolton <tom.bolton at donnslaw.co.uk>
> > > > >Reply-To: Access Developers discussion and problem
> > > > >solving<accessd at databaseadvisors.com>
> > > > >To: "'Access Developers discussion and problem
> > > > >solving'"<accessd at databaseadvisors.com>
> > > > >Subject: RE: [AccessD] Data from Informix to Access - dirty reads?
> > > > >Date: Thu, 27 Jan 2005 10:57:05 -0000
> > > > >
> > > > >Mark (and Jim)
> > > > >
> > > > >Sorry for the delay, had a bit on yesterday. There are indeed
> > >ADO/OLEDB
> > > > >drivers for Informix, a colleague has installed one but is having a
> > > >little
> > > > >difficulty with the connection string. Try
> > > > >http://www.connectionstrings.com
> > > > >
> > > > >
> > > > >Mark - instead of using APPEND queries, would it not be any faster
>to
> > > >pull
> > > > >the data from Informix in an ADO recordset - I'm doing this via
>ODBC
> >as
> > > > >this
> > > > >is how our Terminal Servers are set up >:¬( - then open a DAO
> >recordset
> > > >on
> > > > >your Access table, and loop round in a do...while copying the
>records
> > > >from
> > > > >one to the other? Jim has an excellent link explicitly explaining
> >how
> > >to
> > > > >do
> > > > >just this. However, I've a sneaking suspicion that he's right, and
> > >ODBC
> > > >is
> > > > >at the bottom of your woes - definitely worth exploring OLEDB, as
> > > >methinks
> > > > >ODBC is a little old-hat these days.
> > > > >
> > > > >It might just be me (ASP/Oracle/SQL Server background) but I like
>to
> > >try
> > > > >and
> > > > >avoid letting Jet anywhere near anything that's not solely
>concerned
> > >with
> > > > >Access FE tables (for which, of course, it's excellent).
> > > > >
> > > > >Cheers
> > > > >Tom
> > > > >
> > > > >
> > > > >-----Original Message-----
> > > > >From: Jim Lawrence [mailto:accessd at shaw.ca]
> > > > >Sent: 27 January 2005 04:48
> > > > >To: 'Access Developers discussion and problem solving'
> > > > >Subject: RE: [AccessD] Data from Informix to Access - dirty reads?
> > > > >
> > > > >Hi Mark:
> > > > >
> > > > >Your bottle-neck is ODBC. The only way around that is if there is a
> > > >direct
> > > > >ADO-OLE equivalent. I am sure there are ADO drivers for every
>version
> > >of
> > > > >Informix...check these out:
> > > > >
> > > >
> > >
> >
> >http://www.gold-software.com/LuxenadbExpressdriverforInformixPro-review9342
> > > >.
> > > > >htm (ADO type driver... shareware.
> > > > >
> > > > >You can download the driver from IBM at:
> > > > >http://www.ibm.com/products/finder/us/en/finders?pg=ddfinder
> > > > >
> > > > >To then use it the code is something like this:
> > > > >
> > > > >Dim objConn As ADODB.Connection
> > > > >Dim gsConnectionString as String
> > > > >
> > > > >gsConnectionString = "Provider=Ifxoledbc;Password=pass; Persist
> > >Security
> > > > >Info=True;User ID=user;Data Source=market_report;"
> > > > >
> > > > >objConn.connectionstring = gsConnectionString
> > > > >objConn.Open
> > > > >
> > > > >HTH
> > > > >Jim
> > > > >
> > > > >
> > > > >-----Original Message-----
> > > > >From: accessd-bounces at databaseadvisors.com
> > > > >[mailto:accessd-bounces at databaseadvisors.com] On Behalf Of Mark A
> >Matte
> > > > >Sent: Tuesday, January 25, 2005 6:49 AM
> > > > >To: accessd at databaseadvisors.com
> > > > >Subject: RE: [AccessD] Data from Informix to Access - dirty reads?
> > > > >
> > > > >Hello All,
> > > > >
> > > > >Every week I do pulls from Informix to A97 using ODBC. 1 of my
>pulls
> > >now
> > > > >is
> > > > >
> > > > >around 1 million records. I use temp tables and append queries.
> >This
> > > >can
> > > > >take a few hours. Some of the replies in this thread imply there
>is
> >a
> > > >much
> > > > >'better/faster' way. Without changing versions of Access...is
>there
> >a
> > > >way
> > > > >to 'tweak'/'speed up' this data pull?
> > > > >
> > > > >Thanks,
> > > > >
> > > > >Mark
> > > > >
> > > > > >From: Roz Clarke <roz.clarke at donnslaw.co.uk>
> > > > > >Reply-To: Access Developers discussion and problem
> > > > > >solving<accessd at databaseadvisors.com>
> > > > > >To: "'Access Developers discussion and problem
> > > > > >solving'"<accessd at databaseadvisors.com>
> > > > > >Subject: RE: [AccessD] Data from Informix to Access - dirty
>reads?
> > > > > >Date: Tue, 25 Jan 2005 09:52:19 -0000
> > > > > >
> > > > > >Informix doesn't support XML afaik ><
> > > > > >
> > > > > >We did think about this as a way around connection issues for SQL
> > > >Server
> > > > > >when we thought that we would have our main db replicating to SQL
> > > >Server
> > > > > >rather than Informix - our recordsets are going to be up to about
> >50k
> > > > >rows
> > > > > >I
> > > > > >think. I don't know how XML would perform with that volume of
>data
> > >but
> > > > >it's
> > > > > >academic for now.
> > > > > >
> > > > > >Roz
> > > > > >
> > > > > >-----Original Message-----
> > > > > >From: John W. Colby [mailto:jwcolby at colbyconsulting.com]
> > > > > >Sent: 24 January 2005 20:58
> > > > > >To: 'Access Developers discussion and problem solving'
> > > > > >Subject: RE: [AccessD] Data from Informix to Access - dirty
>reads?
> > > > > >
> > > > > >
> > > > > >How much data? Can it export it to an XML file in a location
>where
> > > >your
> > > > >fe
> > > > > >can use it? XML has a high overhead but can be useful in cases
> >like
> > > > >this.
> > > > > >
> > > > > >John W. Colby
> > > > > >www.ColbyConsulting.com
> > > > > >
> > > > > >Contribute your unused CPU cycles to a good cause:
> > > > > >http://folding.stanford.edu/
> > > > > >
> > > > > >-----Original Message-----
> > > > > >From: accessd-bounces at databaseadvisors.com
> > > > > >[mailto:accessd-bounces at databaseadvisors.com] On Behalf Of Roz
> >Clarke
> > > > > >Sent: Monday, January 24, 2005 10:23 AM
> > > > > >To: 'Access Developers discussion and problem solving'
> > > > > >Subject: [AccessD] Data from Informix to Access - dirty reads?
> > > > > >
> > > > > >
> > > > > >Hi all
> > > > > >
> > > > > >
> > > > > >We have a bit of a problem with getting data out of our Informix
> > >server
> > > > > >since we recently turned on transaction logging for replication.
> >When
> > > > > >extracting data with an Access XP MDE using pass-through queries,
> > > >Access
> > > > > >locks entire tables in the Informix database, which causes
> > >transaction
> > > > > >errors and makes the Informix database scarily unstable.
> > > > > >
> > > > > >Our Informix suppliers told us that the way to avoid these
>locking
> > > >issues
> > > > > >was to set the connection to 'dirty read' before running the SQL.
> > > > >However,
> > > > > >Access cannot execute 2 statements in a pass-through query and it
> > >does
> > > > >not
> > > > > >hold the connection open between the execution of 1 statement and
> >the
> > > > >next.
> > > > > >Thus when the query is processed the 'dirty read' setting is no
> > >longer
> > > >in
> > > > > >effect.
> > > > > >
> > > > > >We have been racking our brains trying to come up with a
> >workaround.
> > > >Some
> > > > > >further options that we have considered are:
> > > > > >
> > > > > >* Stick the data in a temp table in Informix. This is no good
> >because
> > > > > >the temp table is destroyed automatically when the connection is
> > >closed
> > > > >and
> > > > > >there's no way to make it persist long enough to bind it to a
> >report.
> > > > > >* Use a view in Informix. This is no good because views in
> >Informix
> > > > > >cannot be set read-only.
> > > > > >* Create a permanent table in Informix and destroy it when
> >finished
> > > > > >with it. This is far from ideal because Informix does not support
> > > >SELECT
> > > > > >INTO and therefore a table would have to be explicitly
>constructed
> > >with
> > > > > >names columns etc. We really need the system to be flexible so
>that
> > >the
> > > > > >queries can be easily changed.
> > > > > >* Use an ADO recordset. This is a PITA because you cannot bind
> >a
> > > > > >report to a recordset in an MDE and we cannot build the report on
> >the
> > > >fly
> > > >
> > > > >-
> > > > > >we are a Terminal Services site so we will have up to 20 users in
> >one
> > > >FE.
> > > > > >* Create a table in Access and destroy it when finished with
> >it.
> > >Can't
> > > > > >think of a better way to induce bloating...
> > > > > >
> > > > > >Has anyone faced this kind of problem before? Any bright ideas?
>Our
> > > > > >foreheads are starting to bleed...
> > > > > >
> > > > > >TIA
> > > > > >
> > > > > >Roz (and Tom)
> > > > > >
> > > > > >
> > > > > >--
> > > > > >AccessD mailing list
> > > > > >AccessD at databaseadvisors.com
> > > > > >http://databaseadvisors.com/mailman/listinfo/accessd
> > > > > >Website: http://www.databaseadvisors.com
> > > > > >
> > > > > >The contents of this message and any attachments are the property
> >of
> > > > >Donns
> > > > > >Solicitors
> > > > > >and are intended for the confidential use of the named recipient
> > >only.
> > > > > >They may be legally
> > > > > > privileged and should not be communicated to, or relied upon,
>by
> > >any
> > > > > >other party without
> > > > > >our written consent. If you are not the addressee, please notify
> >us
> > > > > >immediately so that we
> > > > > >can make arrangements for its return. You should not show this
> > >e-mail
> > > >to
> > > > > >any person or
> > > > > > take copies as you may be committing a criminal or civil
>offence
> > >for
> > > > > >which you may be
> > > > > > liable. The statement and opinions expressed in this e-mail
> > >message
> > > > >are
> > > > > >those of the
> > > > > >writer, and do not necessarily represent that of Donns
>Solicitors.
> > > > > >Although any files attached
> > > > > > to this e-mail will have been checked with virus protection
> > >software
> > > > > >prior to transmission,
> > > > > >you should carry out your own virus check before opening any
> > > >attachment.
> > > > > >Donns Solicitors does not accept any liability for any damage or
> >loss
> > > > >which
> > > > >
> > > > > >may be caused
> > > > > >by software viruses...
> > > > > >--
> > > > > >AccessD mailing list
> > > > > >AccessD at databaseadvisors.com
> > > > > >http://databaseadvisors.com/mailman/listinfo/accessd
> > > > > >Website: http://www.databaseadvisors.com
> > > > >
> > > > >
> > > > >--
> > > > >AccessD mailing list
> > > > >AccessD at databaseadvisors.com
> > > > >http://databaseadvisors.com/mailman/listinfo/accessd
> > > > >Website: http://www.databaseadvisors.com
> > > > >
> > > > >--
> > > > >AccessD mailing list
> > > > >AccessD at databaseadvisors.com
> > > > >http://databaseadvisors.com/mailman/listinfo/accessd
> > > > >Website: http://www.databaseadvisors.com
> > > > >
> > > > >The contents of this message and any attachments are the property
>of
> > > >Donns
> > > > >Solicitors
> > > > >and are intended for the confidential use of the named recipient
> >only.
> > > > >They may be legally
> > > > > privileged and should not be communicated to, or relied upon, by
> >any
> > > > >other party without
> > > > >our written consent. If you are not the addressee, please notify
>us
> > > > >immediately so that we
> > > > >can make arrangements for its return. You should not show this
> >e-mail
> > >to
> > > > >any person or
> > > > > take copies as you may be committing a criminal or civil offence
> >for
> > > > >which you may be
> > > > > liable. The statement and opinions expressed in this e-mail
> >message
> > > >are
> > > > >those of the
> > > > >writer, and do not necessarily represent that of Donns Solicitors.
> > > > >Although any files attached
> > > > > to this e-mail will have been checked with virus protection
> >software
> > > > >prior to transmission,
> > > > >you should carry out your own virus check before opening any
> > >attachment.
> > > > >Donns Solicitors does not accept any liability for any damage or
>loss
> > > >which
> > > >
> > > > >may be caused
> > > > >by software viruses...
> > > > >--
> > > > >AccessD mailing list
> > > > >AccessD at databaseadvisors.com
> > > > >http://databaseadvisors.com/mailman/listinfo/accessd
> > > > >Website: http://www.databaseadvisors.com
> > > >
> > > >
> > > >--
> > > >AccessD mailing list
> > > >AccessD at databaseadvisors.com
> > > >http://databaseadvisors.com/mailman/listinfo/accessd
> > > >Website: http://www.databaseadvisors.com
> > > >
> > > >The contents of this message and any attachments are the property of
> > >Donns
> > > >Solicitors
> > > >and are intended for the confidential use of the named recipient
>only.
> > > >They may be legally
> > > > privileged and should not be communicated to, or relied upon, by
>any
> > > >other party without
> > > >our written consent. If you are not the addressee, please notify us
> > > >immediately so that we
> > > >can make arrangements for its return. You should not show this
>e-mail
> >to
> > > >any person or
> > > > take copies as you may be committing a criminal or civil offence
>for
> > > >which you may be
> > > > liable. The statement and opinions expressed in this e-mail
>message
> > >are
> > > >those of the
> > > >writer, and do not necessarily represent that of Donns Solicitors.
> > > >Although any files attached
> > > > to this e-mail will have been checked with virus protection
>software
> > > >prior to transmission,
> > > >you should carry out your own virus check before opening any
> >attachment.
> > > >Donns Solicitors does not accept any liability for any damage or loss
> > >which
> > >
> > > >may be caused
> > > >by software viruses...
> > > >--
> > > >AccessD mailing list
> > > >AccessD at databaseadvisors.com
> > > >http://databaseadvisors.com/mailman/listinfo/accessd
> > > >Website: http://www.databaseadvisors.com
> > >
> > >
> > >--
> > >AccessD mailing list
> > >AccessD at databaseadvisors.com
> > >http://databaseadvisors.com/mailman/listinfo/accessd
> > >Website: http://www.databaseadvisors.com
> > >
> > >The contents of this message and any attachments are the property of
> >Donns
> > >Solicitors
> > >and are intended for the confidential use of the named recipient only.
> > >They may be legally
> > > privileged and should not be communicated to, or relied upon, by any
> > >other party without
> > >our written consent. If you are not the addressee, please notify us
> > >immediately so that we
> > >can make arrangements for its return. You should not show this e-mail
>to
> > >any person or
> > > take copies as you may be committing a criminal or civil offence for
> > >which you may be
> > > liable. The statement and opinions expressed in this e-mail message
> >are
> > >those of the
> > >writer, and do not necessarily represent that of Donns Solicitors.
> > >Although any files attached
> > > to this e-mail will have been checked with virus protection software
> > >prior to transmission,
> > >you should carry out your own virus check before opening any
>attachment.
> > >Donns Solicitors does not accept any liability for any damage or loss
> >which
> >
> > >may be caused
> > >by software viruses...
> > >--
> > >AccessD mailing list
> > >AccessD at databaseadvisors.com
> > >http://databaseadvisors.com/mailman/listinfo/accessd
> > >Website: http://www.databaseadvisors.com
> >
> >
> >--
> >AccessD mailing list
> >AccessD at databaseadvisors.com
> >http://databaseadvisors.com/mailman/listinfo/accessd
> >Website: http://www.databaseadvisors.com
> >
> >The contents of this message and any attachments are the property of
>Donns
> >Solicitors
> >and are intended for the confidential use of the named recipient only.
> >They may be legally
> > privileged and should not be communicated to, or relied upon, by any
> >other party without
> >our written consent. If you are not the addressee, please notify us
> >immediately so that we
> >can make arrangements for its return. You should not show this e-mail to
> >any person or
> > take copies as you may be committing a criminal or civil offence for
> >which you may be
> > liable. The statement and opinions expressed in this e-mail message
>are
> >those of the
> >writer, and do not necessarily represent that of Donns Solicitors.
> >Although any files attached
> > to this e-mail will have been checked with virus protection software
> >prior to transmission,
> >you should carry out your own virus check before opening any attachment.
> >Donns Solicitors does not accept any liability for any damage or loss
>which
>
> >may be caused
> >by software viruses...
> >--
> >AccessD mailing list
> >AccessD at databaseadvisors.com
> >http://databaseadvisors.com/mailman/listinfo/accessd
> >Website: http://www.databaseadvisors.com
>
>
>--
>AccessD mailing list
>AccessD at databaseadvisors.com
>http://databaseadvisors.com/mailman/listinfo/accessd
>Website: http://www.databaseadvisors.com
>
>The contents of this message and any attachments are the property of Donns
>Solicitors
>and are intended for the confidential use of the named recipient only.
>They may be legally
> privileged and should not be communicated to, or relied upon, by any
>other party without
>our written consent. If you are not the addressee, please notify us
>immediately so that we
>can make arrangements for its return. You should not show this e-mail to
>any person or
> take copies as you may be committing a criminal or civil offence for
>which you may be
> liable. The statement and opinions expressed in this e-mail message are
>those of the
>writer, and do not necessarily represent that of Donns Solicitors.
>Although any files attached
> to this e-mail will have been checked with virus protection software
>prior to transmission,
>you should carry out your own virus check before opening any attachment.
>Donns Solicitors does not accept any liability for any damage or loss which
>may be caused
>by software viruses...
>--
>AccessD mailing list
>AccessD at databaseadvisors.com
>http://databaseadvisors.com/mailman/listinfo/accessd
>Website: http://www.databaseadvisors.com