[dba-Tech] A Linux Printer Setup Question

Ah, thank you, Gustav, for pointing me in the right direction.  As it 
happens, in this course - I'm in chapter 14 of 18 - the idea of a host 
other than the localhost to which the VM is connected, had never come up 
until this moment.  I do have CUPS installed.  The video demo was 
showing how to add a network printer and it said to enter the host 
name.  Ah, what was to be the host?  Was it the localhost?  Nope.  It 
shouldn't be my physical computer I would think, since I'm not using it 
as a printer server.  But, now, I will look to the router and to the 
printer itself.  Thanks.
TNF

Tina Norris Fields
tinanfields-at-torchlake-dot-com
231-322-2787

On 10/18/2014 4:11 AM, Gustav Brock wrote:
> Hi Tina
>
> Linux people never learn to speak human. On the other hand, as you have worked your way through this course, it's a bit strange that you haven't met this fundamental item.
>
> A host is a device on your network. It has an IP address and often a name, the hostname.
>
> You could run a DNS server where the hosts are listed by name like HPLASER4, but that is rare for small setups. Thus, in your case, the host is the IP address of the printer - or rather its built-in printer server that controls the physical printer. Such a combo is called a network printer. In the old days, a printer had a parallel and/serial connection and connected to the network via an external printer server. This could be a PC or a dedicated physical box.
>
> Nowadays some routers can act as a printer server. You connect via USB the physical printer to the router, and configures this to present the printer as a networked printer by a hostname of your choice. The IP address will be that of the router (your gateway IP address of your workstations).
>
> /gustav
> ________________________________________
> Fra: dba-tech-bounces at databaseadvisors.com <dba-tech-bounces at databaseadvisors.com> på vegne af Tina Norris Fields <tinanfields at torchlake.com>
> Sendt: 18. oktober 2014 00:32
> Til: DatabaseAdvisors-Tech; Off Topic
> Emne: [dba-Tech] A Linux Printer Setup Question
>
> Hi Colleagues,
>
> I'm working my way through the Intro to Linux course at edX.org. I'm at
> the point where they're teaching about setting up a printer. The
> instructions tell me to indicate the host where the network printer is
> to be found.  However, I have no idea what is meant here by "host."
>
> My Ubuntu is in a VMWare virtual machine.  I want to connect it to the
> printer on my network.  The printer is cabled to the router in my
> office.  What is the host?  What am I really looking for?
>
> Thanks,
> TNF
>
> --
> Tina Norris Fields
> tinanfields-at-torchlake-dot-com
> 231-322-2787
>
> _______________________________________________
> dba-Tech mailing list
> dba-Tech at databaseadvisors.com
> http://databaseadvisors.com/mailman/listinfo/dba-tech
> Website: http://www.databaseadvisors.com
>