[dba-Tech] Font Sizes

[accesspro at gmail.com]

Thanks to all respondents.
I found no way to accommodate all the different programs I use. 
So, I will just live w the least impactful ones not being large enough.

Bob
accesspro at gmail.com

file:///P:/Bob/scan0053.pdf



-----Original Message-----
From: dba-Tech <dba-tech-bounces+accesspro=gmail.com at databaseadvisors.com>
On Behalf Of Gustav Brock via dba-Tech
Sent: Wednesday, June 12, 2024 10:55 PM
To: Discussion of Hardware and Software issues
<dba-tech at databaseadvisors.com>
Cc: Gustav Brock <gustav at cactus.dk>
Subject: Re: [dba-Tech] Font Sizes

Hi Bob

If possible, you should always stick to the recommended resolution.
I use the same resolution at 60Hz, though at a scaling of only 125%, but the
monitor is 32". Text size at default.
That fits me well.

I did try a scaling of 150%, and that makes reading the property sheets
easier, but the applications eat too much screen estate. 

/gustav

-----Oprindelig meddelelse-----
Fra: dba-Tech <dba-tech-bounces+gustav=cactus.dk at databaseadvisors.com> På
vegne af accesspro at gmail.com
Sendt: 13. juni 2024 01:56
Til: 'Discussion of Hardware and Software issues'
<dba-tech at databaseadvisors.com>
Emne: Re: [dba-Tech] Font Sizes

These are my current settings.
Seems I have adjusted all of them at one time or another.

Scale =  150% (Recommended)
Display resolution  3840 X 2160 (Recommended)
30 Hz
Text Size 166%



Thanks for all responses.





-----Original Message-----
From: dba-Tech <dba-tech-bounces+accesspro=gmail.com at databaseadvisors.com>
On Behalf Of Stuart McLachlan
Sent: Wednesday, June 12, 2024 4:46 PM
To: Discussion of Hardware and Software issues
<dba-tech at databaseadvisors.com>
Subject: Re: [dba-Tech] Font Sizes

What resolution and scaling are you using?

At High Resolutions, I find that I have to go to one higher than the
recommended scaling to avoid eye strain in several applications (including
Access property boxes). 

On 12 Jun 2024 at 15:17, accesspro at gmail.com wrote:

> I am wondering if any of us has also had/is having an issue with the size
of the fonts in the size of the "dialog boxes" and other screen elements of
Win 11. I notice this particularly in the property boxes in Access. They are
just too small to read. Not a lot on line regarding this. The one idea was
that even though it is win 10 or 11, win32 elements are still used in some
areas. This seems to make sense. But no one has a solution.
> 
> I am using a 27" monitor. 
> I have most all resolution/size settings set to the "recommended" values.
> 
> 
> TIA,
> 
> Bob Heygood
> accesspro at gmail.com 
_______________________________________________
dba-Tech mailing list
dba-Tech at databaseadvisors.com
https://databaseadvisors.com/mailman/listinfo/dba-tech
Website: http://www.databaseadvisors.com